ADSP-BF523KBCZ-6
| Parameters | |
|---|---|
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 289-LFBGA, CSPBGA |
| Number of Pins | 289 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| Type | Fixed Point |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 600MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADSP-BF523 |
| Pin Count | 289 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | DMA, I2C, PPI, SPI, SPORT, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.7V |
| Memory Size | 132kB |
| RAM Size | 32kB |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Address Bus Width | 19 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 2 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.10V |
| Height Seated (Max) | 1.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF523KBCZ-6 Overview
Basically, it is a type of electronic component that is available in a 289-LFBGA, CSPBGA package.Packaging is provided in the form of Tray.With its association with Fixed Point, it is suitable for a wide range of applications.Surface Mount is the direction in which it is mounted.By operating the device at the temperature of 0°C~70°C TA, a normal operation is ensured.The analog voltage range of 1.8V 2.5V 3.3V refers to the input or output voltage.There are several digital signal processors in the Blackfin? series, including this one.For its use, it has 289 terminations.A voltage of 1.8V is used as the supply voltage.Pins are located on the 289 component.An overview of its configuration can be found in the section on 289 pins.Several related parts can be identified using its base part number, ADSP-BF523.600MHz is a frequency at which the device operates according to a specific design.It adopts Surface Mount as its mounting way.As a result of its specific characteristics, this device can be classified under the Microprocessors subcategory.In order to power this device, a voltage as low as 1.7V needs to be supplied.This device can be powered by 3.6V voltages.In order for it to operate, 3.3V is the supply voltage.It can store 132kB data in its memory.It is possible to configure the data format and transfer speed of 2 UART channels for synchronous serial communication.Count, measure, and measure external events using 9 timers/counters.It is based on the Blackfin architecture.
ADSP-BF523KBCZ-6 Features
Supplied in the 289-LFBGA, CSPBGA package
Operating supply voltage of 3.3V
9 timers/counters
ADSP-BF523KBCZ-6 Applications
There are a lot of Analog Devices Inc. ADSP-BF523KBCZ-6 DSP applications.
- Remote sensing image processing technology
- Automatic analysis system of EEG or ECG
- Machinery and equipment
- Electronic information engineering
- Image signal processing
- Automobile electronic gadgets
- Geoscience signal processing
- Monitoring equipment
- Sonar
- Digital hardware
