ADSP-BF525KBCZ-5C2
| Parameters | |
|---|---|
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 289-LFBGA, CSPBGA |
| Number of Pins | 289 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| Termination | SMD/SMT |
| Type | Fixed Point |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 600MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADSP-BF525 |
| Pin Count | 289 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | DMA, I2C, PPI, SPI, SPORT, UART, USB |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.8V |
| Memory Size | 132kB |
| Number of I/O | 48 |
| Speed | 533 MHz |
| RAM Size | 32kB |
| Number of Bits | 32 |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 2 |
| Barrel Shifter | NO |
| Internal Bus Architecture | SINGLE |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.10V |
| Clock Rate | 533MHz |
| Height Seated (Max) | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF525KBCZ-5C2 Overview
Basically, it is a type of electronic component that is available in a 289-LFBGA, CSPBGA package.There is a packaging method of Tray provided with it.With its association with Fixed Point, it is suitable for a wide range of applications.Surface Mount is the direction in which it is mounted.As long as it is operated at the temperature of 0°C~70°C TA, it will operate normally.The analog voltage range of 1.8V 2.5V 3.3V refers to the input or output voltage.The Blackfin? series incorporates this digital signal processor.The 289 terminations are used for its uses.The supply voltage is 3.3V.289 components have pins.Its configuration includes 289 pins.Based on its base part number of ADSP-BF525, many ralated parts can be found.A specific design is present for the device in order for it to operate at the frequency of 600MHz.Surface Mount is used as the mounting method.As a result of its specific characteristics, this device can be classified under the Microprocessors subcategory.The minimum voltage supplied to this device is as low as 1.8V.This device can be powered by 3.6V voltages.The device operates on a voltage of 3.3V as its supply voltage.Using this device, you can store 132kB data.The 2 UART channels are configured to support asynchronous serial transmissions of data in a format and speed that can be configured.To measure time and count events externally, 9 timers/counters are used.It is based on the Blackfin architecture.48 I/Os are available on the device.In the device are 32 pieces of information.
ADSP-BF525KBCZ-5C2 Features
Supplied in the 289-LFBGA, CSPBGA package
Operating supply voltage of 3.3V
9 timers/counters
48 I/Os
ADSP-BF525KBCZ-5C2 Applications
There are a lot of Analog Devices Inc. ADSP-BF525KBCZ-5C2 DSP applications.
- Vehicle electronics
- Biometrics
- Real-time effects
- Statistical signal processing
- Geoscience signal processing
- Biomedical treatment
- Finite impulse response digital filters
- Digital hardware
- Tomography technology
- Automobile electronic gadgets
