ADSP-BF527KBCZ-6C2
| Parameters | |
|---|---|
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 289-LFBGA, CSPBGA |
| Number of Pins | 289 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| Termination | SMD/SMT |
| Type | Fixed Point |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 600MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADSP-BF527 |
| Pin Count | 289 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | DMA, Ethernet, I2C, PPI, SPI, SPORT, UART, USB |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.8V |
| Memory Size | 132kB |
| Number of I/O | 48 |
| RAM Size | 32kB |
| Memory Type | EEPROM, FLASH |
| Number of Bits | 32 |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 2 |
| Barrel Shifter | NO |
| Internal Bus Architecture | SINGLE |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.10V |
| Number of Ethernet Channels | 1 |
| Height | 1.2mm |
| Length | 12mm |
| Width | 12mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF527KBCZ-6C2 Overview
It is a type of electronic component available in package 289-LFBGA, CSPBGA.The packaging way is Tray.Fixed Point members are well suited for a wide range of applications.The device is attached in a way that faces Surface Mount.It is essential that 0°C~70°C TA is kept at a temperature that ensures proper operation of the machine.In analog circuits, the analog voltage range 1.8V 2.5V 3.3V represents the voltage range that is available for input or output.This digital signal processor is included into the Blackfin? series.Its uses have 289 terminations.A voltage of 3.3V is used as the supply voltage.Pins are available for 289 components.The configuration of this board includes 289 pins.Based on its base part number of ADSP-BF527, many ralated parts can be found.In order for the device to operate at the frequency of 600MHz, it has been designed specifically.It adopts Surface Mount as its mounting way.As a result of its specific characteristics, this device can be classified under the Microprocessors subcategory.This device can be powered by voltages as low as 1.8V.It can be supplied with a maximum voltage of 3.6V.The device operates with a supply voltage of 3.3V.Its memory can store 132kB data.Data formats and transmission speeds are configurable for 2 UART channels used for asynchronous serial communication.Time and external events are measured and counted with 9 timers/counters.Blackfin architecture is used for this processor core.48 I/Os are available on the device.The memory type it uses is EEPROM, FLASH.In the device are 32 pieces of information.A 1 Ethernet channel facilitates communication between networks of different types.
ADSP-BF527KBCZ-6C2 Features
Supplied in the 289-LFBGA, CSPBGA package
Operating supply voltage of 3.3V
9 timers/counters
48 I/Os
ADSP-BF527KBCZ-6C2 Applications
There are a lot of Analog Devices Inc. ADSP-BF527KBCZ-6C2 DSP applications.
- Instrument modeling
- Digital image processing
- Fourier transform
- Smart phones
- Processing system
- Spectral density estimation
- Medical imaging
- Sonar
- Other sensor array processing
- TVs
