ADSP-BF532SBBC400
| Parameters | |
|---|---|
| Contact Plating | Lead, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 160-LFBGA, CSPBGA |
| Number of Pins | 160 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| Type | Fixed Point |
| Terminal Finish | Tin/Lead/Silver (Sn/Pb/Ag) |
| Additional Feature | ALSO REQUIRES 3V OR 3.3V SUPPLY |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-BF532 |
| Pin Count | 160 |
| Interface | SPI, SSP, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Memory Size | 84kB |
| Number of I/O | 16 |
| RAM Size | 32kB |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 4 |
| Address Bus Width | 19 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (1kB) |
| Voltage - Core | 1.20V |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADSP-BF532SBBC400 Overview
It is a type of electronic component available in package 160-LFBGA, CSPBGA.A packaging way of Tray is provided.In addition to meeting a wide range of requirements, it is a member of Fixed Point.Surface Mount is the direction in which it is mounted.It is essential that -40°C~85°C TA is kept at a temperature that ensures proper operation of the machine.The digital voltage range of 3.30V refers to the voltage that can be input or output.There are several digital signal processors in the Blackfin? series, including this one.The use of it is terminated by 160.The supply voltage is 1.2V.Pins are present on the 160 component.160 pins can be found in its configuration.Many related parts can be identified by using the ADSP-BF532 part number as a base.In order for the device to operate at 400MHz frequency, there is a specific design.In order to mount it, it utiliSurface Mountes the Surface Mount method.This device can be classified into the subcategory Microprocessors based on its specific characteristics.This device requires a minimum voltage of 800mV.This device can be powered by 3.6V voltages.84kB data can be stored in the memory of this device.There is a possibility to configure data formats and transmission speeds for 1 UART channels configured for asynchronous serial communication.A further set of features can be provided by this electronic part for ALSO REQUIRES 3V OR 3.3V SUPPLY as well.Timer/counters for measuring and counting external events are called 4 timers or counters.Processor core Blackfin adopts the Blackfin architecture.There are 16 I/Os on the device.
ADSP-BF532SBBC400 Features
Supplied in the 160-LFBGA, CSPBGA package
4 timers/counters
16 I/Os
ADSP-BF532SBBC400 Applications
There are a lot of Analog Devices Inc. ADSP-BF532SBBC400 DSP applications.
- Biometrics
- Receivers
- Remote sensing image processing technology
- Control systems
- Processing system
- Airplanes
- Scene analysis technology
- Encoding/broadcast
- Audio signal
- Geophysical processing
