ADSP-BF533SKBCZ-6V
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 160-LFBGA, CSPBGA |
| Number of Pins | 160 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | ALSO REQUIRES 3V OR 3.3V SUPPLY |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 600MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF533 |
| Pin Count | 160 |
| Interface | SPI, SSP, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Memory Size | 148kB |
| RAM Size | 64kB |
| Memory Type | ROM, SRAM |
| Number of Bits | 16 |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 4 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (1kB) |
| Voltage - Core | 1.30V |
| Height | 1.21mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF533SKBCZ-6V Overview
In the 160-LFBGA, CSPBGA package, it is a type of electronic component.Packaging method Tray is provided.The fact that it belongs to the Fixed Point family means that it can be applied to a wide range of applications.It is mounted in the direction of Surface Mount as shown in the image below.It is important that the device is operated at a temperature of 0°C~70°C TA in order to ensure its normal functioning.The digital voltage range of 1.8V 3.3V refers to the voltage that can be input or output.Digital signal processors such as this one are included in the Blackfin? series.In order to use it, it has 160 terminations.It operates with the supply voltage of 1.3V.Pins are present on the 160 component.The configuration of this board includes 160 pins.Based on its base part number of ADSP-BF533, many ralated parts can be found.Specifically, the device is designed to operate at a frequency of 600MHz.In order to mount it, it utiliSurface Mountes the Surface Mount method.The device can be classified under the subcategory Microprocessors based on its specific characteristics.The minimum voltage supplied to this device is as low as 800mV.This device can be powered by 3.6V voltages.This device is able to store 148kB data in its memory.1 UART channels are configured for asynchronous serial communication in which the data format and transmission speeds are configurable.Electronic parts can also add more features to ALSO REQUIRES 3V OR 3.3V SUPPLY.Timer/counters for measuring and counting external events are called 4 timers or counters.An architecture of Blackfin is adopted by this processor core.ROM, SRAM is the type of memory it uses.Data is stored in the device in 16 formats.
ADSP-BF533SKBCZ-6V Features
Supplied in the 160-LFBGA, CSPBGA package
4 timers/counters
ADSP-BF533SKBCZ-6V Applications
There are a lot of Analog Devices Inc. ADSP-BF533SKBCZ-6V DSP applications.
- Speech processing
- Tomography technology
- Automobiles
- 3D tomography and imaging processing
- Audio compression
- Electronic information engineering
- Smart camera
- Consumer electronic gadgets
- Instrument modeling
- Smart phones
