ADSP-BF534YBCZ-4B
| Parameters | |
|---|---|
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 208-FBGA, CSPBGA |
| Number of Pins | 208 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 208 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 500MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF534 |
| Pin Count | 208 |
| Interface | CAN, SPI, SSP, TWI, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Memory Size | 132kB |
| Number of I/O | 48 |
| Speed | 400 MHz |
| RAM Size | 32kB |
| Memory Type | FLASH |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 2.50V 3.30V |
| Number of UART Channels | 2 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.20V |
| Number of SPI Channels | 1 |
| Clock Rate | 400MHz |
| Height | 1.36mm |
| Length | 17.1mm |
| Width | 17.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF534YBCZ-4B Overview
The 208-FBGA, CSPBGA package contains these electronic components.The packaging way is Tray.Fixed Point members are well suited for a wide range of applications.The mounting of the device is done in the direction of Surface Mount.Operating at the temperature of -40°C~105°C TA ensures its normal operation.The digital voltage range of 2.50V 3.30V refers to the voltage that can be input or output.The Blackfin? series incorporates this digital signal processor.208 terminations are available for its use.This device is powered by 1.2V's supply voltage.Pins are available for 208 components.In its configuration, there are 208 pins.The base part number ADSP-BF534 allows identification of a wide range of related parts.This device is designed specifically to operate at frequency 500MHz.The mounting method is Surface Mount.This device can be classified into the subcategory Microprocessors based on its specific characteristics.800mV is the minimum voltage that can be supplied to this device.A maximum voltage of 3.6V can be provided to this device.Data can be stored in this device's memory in 132kB format.There is a possibility to configure data formats and transmission speeds for 2 UART channels configured for asynchronous serial communication.Timers and counters that measure time and count external events are also called 9 timers and counters.A Blackfin-architecture processor core is used here.48 I/Os are included with the device.It adopts FLASH as its memory type.To communicate over short distances, this embedded system uses 1 SPI channels.
ADSP-BF534YBCZ-4B Features
Supplied in the 208-FBGA, CSPBGA package
9 timers/counters
48 I/Os
ADSP-BF534YBCZ-4B Applications
There are a lot of Analog Devices Inc. ADSP-BF534YBCZ-4B DSP applications.
- Streaming videos
- Financial signals
- Vehicle electronics
- Seismology
- Automatic analysis system of EEG or ECG
- Scene analysis technology
- Tomography technology
- Remote sensing image processing technology
- Receivers
- Image signal processing
