ADSP-BF538BBCZ-4F8
| Parameters | |
|---|---|
| Base Part Number | ADSP-BF538 |
| Pin Count | 316 |
| Interface | CAN, SPI, SSP, TWI, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Memory Size | 1MB |
| Number of I/O | 54 |
| Speed | 400 MHz |
| RAM Size | 32kB |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Address Bus Width | 20 |
| Density | 8 Mb |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 3.00V 3.30V |
| Number of UART Channels | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | FLASH (1MB) |
| Voltage - Core | 1.20V |
| On Chip Data RAM | 148kB |
| Clock Rate | 400MHz |
| Height Seated (Max) | 1.7mm |
| Length | 17mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 316-LFBGA, CSPBGA |
| Number of Pins | 316 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 316 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 533MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
ADSP-BF538BBCZ-4F8 Overview
In the 316-LFBGA, CSPBGA package, it is a type of electronic component.A packaging way of Tray is provided.In addition to meeting a wide range of requirements, it is a member of Fixed Point.There is a mounting point for it along the direction of Surface Mount.It is recommended that the device operate at a temperature of -40°C~85°C TA to ensure its normal operation.The digital voltage range of 3.00V 3.30V refers to the voltage that can be input or output.Digital signal processors such as this one are included in the Blackfin? series.Its uses have 316 terminations.This device is powered by 1.2V's supply voltage.Pins are available on the 316 component.The configuration of this board includes 316 pins.The base part number ADSP-BF538 can be used to identify many associated parts.To operate at 533MHz frequency, the device has a specific design.Mounting is accomplished using Surface Mount.Based on its specific characteristics, this device can be classified into the subcategory of Microprocessors.Devices like this can be powered with as little as 800mV volts.Devices like this can be powered by voltages up to 3.6V.There is a memory on this device that can store 1MB data.Data format and transmission speed are configurable on 3 UART channels for asynchronous serial communication.This processor core adopts the architecture of Blackfin.There are 54 I/Os on the device.
ADSP-BF538BBCZ-4F8 Features
Supplied in the 316-LFBGA, CSPBGA package
54 I/Os
ADSP-BF538BBCZ-4F8 Applications
There are a lot of Analog Devices Inc. ADSP-BF538BBCZ-4F8 DSP applications.
- Audio
- Airplanes
- Speech processing and recognition
- Consumer electronic gadgets
- Audio synthesis
- Smart camera
- Sonar
- Sound navigation and ranging systems
- Automobiles
- Tomography technology
