ADSP-BF542BBCZ-5A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 400-LFBGA, CSPBGA |
| Number of Pins | 400 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 400 |
| Type | Fixed Point |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.25V |
| Terminal Pitch | 0.8mm |
| Frequency | 600MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF542 |
| Pin Count | 400 |
| Qualification Status | Not Qualified |
| Interface | CAN, SPI, SSP, TWI, UART, USB |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 900mV |
| Memory Size | 196kB |
| Number of I/O | 152 |
| RAM Size | 64kB |
| Memory Type | FLASH |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 11 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 2.50V 3.30V |
| Number of UART Channels | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.25V |
| On Chip Data RAM | 132kB |
| Number of SPI Channels | 2 |
| Clock Rate | 533MHz |
| Height | 1.36mm |
| Length | 17.2mm |
| Width | 17.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF542BBCZ-5A Overview
It is a type of electronic component available in package 400-LFBGA, CSPBGA.Packaging is provided in the form of Tray.Due to its membership in Fixed Point, it is ideally suited for a wide range of uses.There is a mounting point for it along the direction of Surface Mount.If it is operating at the temperature of -40°C~85°C TA, then it will be operating normally.It refers to the analog voltage range of 2.50V 3.30V that may be input or output.This digital signal processor is included into the Blackfin? series.The use of it is terminated by 400.It operates with the supply voltage of 1.25V.400 components have pins.400 pins can be found in its configuration.There are a number of related parts that can be identified using the base part number ADSP-BF542.To operate at 600MHz frequency, the device has a specific design.As a mounting method, it uses Surface Mount.The device can be classified as part of the Microprocessors subcategory based on its specific characteristics.This device operates at a voltage as low as 900mV.A maximum voltage of 3.6V can be provided to this device.There is a memory on this device that can store 196kB data.There is a possibility to configure data formats and transmission speeds for 3 UART channels configured for asynchronous serial communication.To measure time and count events externally, 11 timers/counters are used.A Blackfin-architecture processor core is used here.152 I/Os are available on the device.Memory type FLASH is used by it.Short-range communication is achieved using 2 SPI channels in this embedded system.
ADSP-BF542BBCZ-5A Features
Supplied in the 400-LFBGA, CSPBGA package
11 timers/counters
152 I/Os
ADSP-BF542BBCZ-5A Applications
There are a lot of Analog Devices Inc. ADSP-BF542BBCZ-5A DSP applications.
- Medical imaging
- Remote sensing image processing technology
- Computers and laptop
- Vehicle electronics
- TVs
- Audio
- Automatic analysis system of EEG or ECG
- Vibration signal processing
- Real-time effects
- House construction
