ADSP-BF544MBBCZ-5M
| Parameters | |
|---|---|
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 400-LFBGA, CSPBGA |
| Number of Pins | 400 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 400 |
| ECCN Code | 5A992.C |
| Type | Fixed Point |
| Terminal Finish | TIN SILVER COPPER |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.25V |
| Terminal Pitch | 0.8mm |
| Frequency | 533MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF544 |
| Pin Count | 400 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.22.5/3.3V |
| Interface | CAN, SPI, SSP, TWI, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 900mV |
| Memory Size | 260kB |
| Number of I/O | 152 |
| RAM Size | 64kB |
| Memory Type | ROM, SRAM |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 2.50V 3.30V |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.25V |
| On Chip Data RAM | 196kB |
| Height | 1.7mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF544MBBCZ-5M Overview
In the 400-LFBGA, CSPBGA package, it is a type of electronic component.Tray packaging is provided for it.In addition to meeting a wide range of requirements, it is a member of Fixed Point.In order to mount it, it must be in the direction of Surface Mount.It is important that the device is operated at a temperature of -40°C~85°C TA in order to ensure its normal functioning.This refers to the analog voltage range that can be input or output from 2.50V 3.30V.The Blackfin? series includes this digital signal processor.The 400 terminations are used for its uses.The voltage supplied by 1.25V is used to operate it.400 components have pins.The configuration of the device includes 400 pins.There are a number of related parts that can be identified using the base part number ADSP-BF544.To operate at 533MHz frequency, the device has a specific design.As a mounting method, it uses Surface Mount.This device can be classified into the subcategory Microprocessors based on its specific characteristics.900mV is the minimum voltage that can be supplied to this device.Devices like this can be powered by voltages up to 3.6V.It can store 260kB data in its memory.Electricity is provided by 1.22.5/3.3V.Using Blackfin architecture, this processor core operates.The device has 152 I/Os.It uses ROM, SRAM as its memory type.
ADSP-BF544MBBCZ-5M Features
Supplied in the 400-LFBGA, CSPBGA package
152 I/Os
ADSP-BF544MBBCZ-5M Applications
There are a lot of Analog Devices Inc. ADSP-BF544MBBCZ-5M DSP applications.
- Digital hardware
- Speech processing and recognition
- Video coding, audio coding
- Remote sensing image processing technology
- Speech processing
- Boats
- Vehicle electronics
- Computers and laptop
- Compression of videos
- 3D tomography and imaging processing
