ADSP-BF547KBCZ-6A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 400-LFBGA, CSPBGA |
| Number of Pins | 400 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 400 |
| ECCN Code | 5A992.C |
| Type | Fixed Point |
| Terminal Finish | TIN SILVER COPPER |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.8mm |
| Frequency | 600MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF547 |
| Pin Count | 400 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.22.5/3.3V |
| Interface | SPI, SSP, TWI, UART, USB |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 900mV |
| Memory Size | 324kB |
| Number of I/O | 152 |
| RAM Size | 64kB |
| Memory Type | ROM, SRAM |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 11 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 2.50V 3.30V |
| Number of UART Channels | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.25V |
| On Chip Data RAM | 260kB |
| Height | 1.7mm |
| Length | 17mm |
| Width | 17mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF547KBCZ-6A Overview
Basically, it is a type of electronic component that is available in a 400-LFBGA, CSPBGA package.It is provided with a packaging way of Tray.Fixed Point members are well suited for a wide range of applications.Surface Mount is the direction in which it is mounted.At the temperature of 0°C~70°C TA, the device is guaranteed to operate normally.The digital voltage range of 2.50V 3.30V refers to the voltage that can be input or output.This digital signal processor is included into the Blackfin? series.The terminations for its uses are 400.There are 400 component pins.Its configuration includes 400 pins.Many related parts can be identified by using the ADSP-BF547 part number as a base.In order for the device to operate at 600MHz frequency, there is a specific design.Using Surface Mount as a mounting method, it is mounted.Based on its specific characteristics, this device can be classified into the subcategory of Microprocessors.This device requires a minimum voltage of 900mV.Devices like this can be powered by voltages up to 3.6V.Data can be stored in this device's memory in 324kB format.It receives electricity from 1.22.5/3.3V.In 4 UART channels, the data format and transmission speeds may be customi4ed for asynchronous serial communication.External events are tracked and measured with 11 timers/counters.Blackfin architecture is used for this processor core.152 I/Os are present on the device.It adopts ROM, SRAM as its memory type.
ADSP-BF547KBCZ-6A Features
Supplied in the 400-LFBGA, CSPBGA package
11 timers/counters
152 I/Os
ADSP-BF547KBCZ-6A Applications
There are a lot of Analog Devices Inc. ADSP-BF547KBCZ-6A DSP applications.
- Streaming music
- Automobiles
- Image signal processing
- Receivers
- Infrared
- Consumer electronic gadgets
- Biomedical treatment
- Audio synthesis
- Tomography technology
- Spectral density estimation
