ADSP-BF561SBB500
| Parameters | |
|---|---|
| Type | Fixed Point |
| Terminal Finish | Tin/Lead/Silver (Sn/Pb/Ag) |
| Additional Feature | ALSO OPERATES AT 2.5 OR 3.3 V NOMINAL SUPPLY |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.25V |
| Reach Compliance Code | not_compliant |
| Frequency | 600MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-BF561 |
| Pin Count | 297 |
| Qualification Status | Not Qualified |
| Interface | SPI, SSP, UART |
| Max Supply Voltage | 1.375V |
| Min Supply Voltage | 800mV |
| Speed | 500 MHz |
| RAM Size | 32kB |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 14 |
| Address Bus Width | 23 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 2.50V 3.30V |
| Number of UART Channels | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.25V |
| On Chip Data RAM | 328kB |
| Clock Rate | 500MHz |
| Height Seated (Max) | 2.43mm |
| Length | 27mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 297-BGA |
| Number of Pins | 297 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 297 |
ADSP-BF561SBB500 Overview
It is a kind of electronic component available in the 297-BGA package.It is provided with a packaging way of Tray.Its Fixed Point status makes it ideal for a wide range of applications.The mounting is carried out in the direction of Surface Mount.It is recommended that the device operate at a temperature of -40°C~85°C TA to ensure its normal operation.The analog voltage range of 2.50V 3.30V refers to the voltage that can be input or ouput.There are several digital signal processors in the Blackfin? series, including this one.Its uses have 297 terminations.The supply voltage is 1.25V.297 component pins are present.This configuration contains 297 pins.The base part number ADSP-BF561 allows identification of a wide range of related parts.This device is designed specifically to operate at frequency 600MHz.Mounting is accomplished using Surface Mount.The specific characteristics of this device can be categoriMicroprocessorsed within the Microprocessors subcategory.In order to power this device, a voltage as low as 800mV needs to be supplied.1.375V is the maximum voltage that can be supplied to this device.The 1 UART channels support synchronous serial communication with configurable data formats and rates.More additional features of ALSO OPERATES AT 2.5 OR 3.3 V NOMINAL SUPPLY can also be provided by this electronic part.To measure time and count events externally, 14 timers/counters are used.An architecture of Blackfin is adopted by this processor core.
ADSP-BF561SBB500 Features
Supplied in the 297-BGA package
14 timers/counters
ADSP-BF561SBB500 Applications
There are a lot of Analog Devices Inc. ADSP-BF561SBB500 DSP applications.
- 3D tomography and imaging processing
- Geophysical processing
- Automatic analysis system of EEG or ECG
- MP3 audio player
- Biomedical engineering
- Audio synthesis
- Vibration signal processing
- Other sensor array processing
- Fourier transform
- Consumer electronic gadgets
