ADSP-BF561SKBCZ-6V
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LFBGA, CSPBGA |
| Number of Pins | 256 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.35V |
| Terminal Pitch | 0.65mm |
| Frequency | 600MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-BF561 |
| Pin Count | 256 |
| Interface | SPI, SSP, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Number of I/O | 48 |
| RAM Size | 32kB |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 14 |
| Address Bus Width | 23 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 2.50V 3.30V |
| Number of UART Channels | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.35V |
| On Chip Data RAM | 328kB |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF561SKBCZ-6V Overview
It is a type of electronic component available in package 256-LFBGA, CSPBGA.There is a packaging method of Tray provided with it.Its Fixed Point status makes it ideal for a wide range of applications.The machine is mounted in the way of Surface Mount in order to facilitate its operation.By operating the device at the temperature of 0°C~70°C TA, a normal operation is ensured.The digital voltage range of 2.50V 3.30V refers to the voltage that can be input or output.There are several digital signal processors in the Blackfin? series, including this one.In terms of its uses, it has 256 terminations.A voltage of 1.35V is used as the supply voltage.256 components have pins.256 pins can be found in its configuration.The base part number ADSP-BF561 can be used to identify many associated parts.600MHz is a frequency at which the device operates according to a specific design.It adopts Surface Mount as its mounting way.Based on its specific characteristics, this device can be classified into the subcategory of Microprocessors.800mV is the minimum voltage that can be supplied to this device.A maximum voltage of 3.6V can be provided to this device.It is possible to configure the data format and transfer speed of 1 UART channels for synchronous serial communication.To measure time and count events externally, 14 timers/counters are used.An architecture of Blackfin is adopted by this processor core.The device has 48 I/Os.
ADSP-BF561SKBCZ-6V Features
Supplied in the 256-LFBGA, CSPBGA package
14 timers/counters
48 I/Os
ADSP-BF561SKBCZ-6V Applications
There are a lot of Analog Devices Inc. ADSP-BF561SKBCZ-6V DSP applications.
- Radio detection and rangin systems
- Machinery and equipment
- Voice recognition
- Digital hardware
- Streaming music
- Biometrics
- 3D tomography and imaging processing
- Financial signals
- Dam design
- Scene analysis technology
