ADSP-BF561SKBCZ500
| Parameters | |
|---|---|
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| Additional Feature | ALSO OPERATES AT 2.5 OR 3.3 V NOMINAL SUPPLY |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.25V |
| Terminal Pitch | 0.65mm |
| Frequency | 600MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF561 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Interface | SPI, SSP, UART |
| Max Supply Voltage | 1.375V |
| Min Supply Voltage | 800mV |
| Speed | 500 MHz |
| RAM Size | 32kB |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 14 |
| Address Bus Width | 23 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 2.50V 3.30V |
| Number of UART Channels | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.25V |
| On Chip Data RAM | 328kB |
| Clock Rate | 500MHz |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LFBGA, CSPBGA |
| Number of Pins | 256 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
ADSP-BF561SKBCZ500 Overview
Basically, it is a type of electronic component that is available in a 256-LFBGA, CSPBGA package.Packaging method Tray is provided.Fixed Point's wide range of applications makes it ideal for a wide variety of applications.It is mounted in the direction of Surface Mount as shown in the image below.It is recommended that the device operate at a temperature of 0°C~70°C TA to ensure its normal operation.It refers to the analog voltage range of 2.50V 3.30V that may be input or output.The Blackfin? series contains this digital signal processor.There are 256 terminations for its uses.The voltage supplied by 1.25V is used to operate it.256 components have pins.There are 256 pins in its configuration.It is possible to identify numerous related parts using the base part number ADSP-BF561.The device operates at the frequency of 600MHz in accordance with a specific design.Surface Mount is the method of mounting it.This device falls into the subcategory of Microprocessors based on its specific characteristics.800mV is the minimum voltage that can be supplied to this device.It can be supplied with a maximum voltage of 1.375V.The 1 UART channels are configured to support asynchronous serial transmissions of data in a format and speed that can be configured.More additional features of ALSO OPERATES AT 2.5 OR 3.3 V NOMINAL SUPPLY can also be provided by this electronic part.Time and external events are measured and counted with 14 timers/counters.A Blackfin-architecture processor core is used here.
ADSP-BF561SKBCZ500 Features
Supplied in the 256-LFBGA, CSPBGA package
14 timers/counters
ADSP-BF561SKBCZ500 Applications
There are a lot of Analog Devices Inc. ADSP-BF561SKBCZ500 DSP applications.
- Automobile electronic gadgets
- Automobiles
- Statistical signal processing
- Audio compression
- Vehicle electronics
- Digital camera
- Signal processing for telecommunications
- Financial signals
- Scene analysis technology
- Smart phones
