ADSP-BF592KCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad, CSP |
| Number of Pins | 64 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Type | Fixed Point |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-BF592 |
| Pin Count | 64 |
| Interface | I2C, I2S, IrDA, PPI, SPI, SPORT, UART |
| Max Supply Voltage | 1.47V |
| Min Supply Voltage | 1.33V |
| Memory Size | 68kB |
| Number of I/O | 32 |
| RAM Size | 32kB |
| Bit Size | 32 |
| Number of Timers/Counters | 4 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (64kB) |
| Voltage - Core | 1.29V |
| On Chip Data RAM | 64kB |
| Number of SPI Channels | 2 |
| Height | 950μm |
| Length | 9mm |
| Width | 9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF592KCPZ Overview
In electronic terms, it is a type of component that comes in the package of type 64-VFQFN Exposed Pad, CSP .Tray is the packaging method provided.Due to its Fixed Point membership, it is ideal for a wide range of applications.It is mounted in the way of Surface Mount.It is important that the device is operated at a temperature of 0°C~70°C TA in order to ensure its normal functioning.The analog voltage range of 1.8V 2.5V 3.3V refers to the input or output voltage.This digital signal processor is part of the Blackfin? series.The use of it is terminated by 64.This device is powered by 1.8V's supply voltage.Pins are available for 64 components.There are 64 pins in its configuration.Several related parts can be identified using its base part number, ADSP-BF592.Specifically, the device is designed to operate at a frequency of 400MHz.Surface Mount is the method of mounting it.On the basis of its specific characteristics, this device can be classified as a Microprocessors device.The minimum voltage supplied to this device is as low as 1.33V.1.47V is the maximum voltage that can be supplied to this device.It can store 68kB data in its memory.1 UART channels are configured for asynchronous serial communication in which the data format and transmission speeds are configurable.Count, measure, and measure external events using 4 timers/counters.The processor core uses the architecture of the Blackfin processor.32 I/Os are included with the device.To communicate over short distances, this embedded system uses 2 SPI channels.
ADSP-BF592KCPZ Features
Supplied in the 64-VFQFN Exposed Pad, CSP package
4 timers/counters
32 I/Os
ADSP-BF592KCPZ Applications
There are a lot of Analog Devices Inc. ADSP-BF592KCPZ DSP applications.
- Remote sensing image processing technology
- Speech processing
- Statistical signal processing
- Compression of videos
- Streaming music
- Machinery and equipment
- Finite impulse response digital filters
- Vibration signal processing
- Audio signal
- Medical imaging
