Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 4 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADTL082 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Number of Channels |
2 |
Operating Supply Current |
2.4mA |
Output Current |
27mA |
Quiescent Current |
1.2mA |
Min Input Voltage |
8V |
Slew Rate |
20V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
J-FET |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
2pA |
Max Input Voltage |
36V |
Voltage - Supply, Single/Dual (±) |
8V~36V ±4V~18V |
Output Current per Channel |
27mA |
Input Offset Voltage (Vos) |
5.5mV |
Bandwidth |
5MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
5000 kHz |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.005μA |
Power Supply Rejection Ratio (PSRR) |
86dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
1.5mV |
Low-Bias |
YES |
Max Frequency |
1kHz |
Bias Current-Max (IIB) @25C |
0.0001μA |
Dual Supply Voltage |
15V |
Input Offset Current-Max (IIO) |
0.005μA |
Input Voltage Noise Density |
16nV/sqrt Hz |
Height |
1.5mm |
Length |
5mm |
Width |
4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADTL082ARZ-REEL7 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Op amps are J-FET types of amplifier on the chip. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. In this case, there are 8 pins on the board. I would like to remind you that this buffer op amp should be powered by an 15V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The op amp ic has an array of 8 pins on it. In terms of the input offset voltage, instrumentation amplifier rates at 5.5mV. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. This op amp can operate from a supply current at 2.4mA. 106.02dB should remain the voltage gain. There are 2 channels on the operational amplifiers. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. Linear amplifier has a quiescent current of 1.2mA.
ADTL082ARZ-REEL7 Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
ADTL082ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADTL082ARZ-REEL7 Instrumentational OP Amps applications.
- Professional videography
- Fission chambers
- Communication device
- E-book readers
- Semiconductor detectors
- Wireless base stations
- Fast A/D and D/A converters
- Hand-held batteries
- Ultrasound transducers
- RF cable systems