ADUM4190BRIZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Packaging | Tube |
| Series | iCoupler® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | EAR99 |
| Type | Isolator, Error Amplifier |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Shunt Regulators, Linear Power Supplies, Inverters, UPS |
| Max Power Dissipation | 2.78W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADUM4190 |
| Pin Count | 16 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 2.9mA |
| Nominal Supply Current | 2.9mA |
| Accuracy | 1 % |
| Max Output Voltage | 5V |
| Min Input Voltage | 400mV |
| Common Mode Rejection Ratio | 72 dB |
| Max Input Voltage | 1.5V |
| Bandwidth | 400 kHz |
| Gain Bandwidth Product | 10MHz |
| Min Output Voltage | 400mV |
| -3db Bandwidth | 400 kHz |
| Isolation Voltage | 5kV |
| Number of Amplifiers | 1 |
| Height | 2.44mm |
| Length | 12.85mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADUM4190BRIZ Overview
These devices are packaged in an integrated Tube-package.There is no doubt that this is an excellent Isolator, Error Amplifier that is very good value for money.A package containing 16-SOIC (0.295, 7.50mm Width) has been dispatched.Mounting is carried out in the Surface Mount direction of the part.The most common application is in Shunt Regulators, Linear Power Supplies, Inverters, UPS.It is important to note that ADUM4190 is the base part number for this device.For the purposes of amplification, 1 functions are used here to access high performance.When proceeding peak relow for the part, the iron temperature should be controlled under 260.In total, there are 16 pins of the part.In order for this amplifier to operate properly, I would recommend a supply voltage of 5V.It is a 16-pin amplifier that can be customized to meet your specific needs.Temperatures as low as -40°C are the lowest the device can operate at.An impressive feature of this part is its ability to run at temperatures as high as 85°C.Using Surface Mount as a component of this product will allow it to provide greater design flexibility.Depending on the supply voltage, the device is rated for a maximum voltage of 20V.Power supply must be at least 3V volts.With this video processor, you are able to achieve amazing performance as it combines 2 channels.Set the supply current to 2.9mA to keep the amplifier working normally.There is no performance degradation at -3db bandwidth.Visit the official website to learn more: iCoupler? series.
ADUM4190BRIZ Features
ADUM4190BRIZ Applications
There are a lot of Analog Devices Inc. ADUM4190BRIZ Special Purpose Amplifiers applications.
- Communication
- Signal amplification
- Semiconductor detectors
- Vehicle electronics
- Home and commercial audio systems
- Large motor controllers
- Signal filtering
- PDA
- Medical instruments
- Logarithmic and exponential operation circuits
