ADV3219ACPZ
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADV3219 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 7mA |
| Bandwidth | 800MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 5.5V |
| -3db Bandwidth | 840MHz |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 2μA Typ |
| Channel Capacitance (CS(off), CD(off)) | 0.6pF |
| Switch Circuit | SPDT |
| Crosstalk | -70dB @ 100MHz |
| Voltage - Supply, Dual (V±) | ±4.5V~5.5V |
| Height | 750μm |
| Length | 3.1mm |
| Width | 3.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 20mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
ADV3219ACPZ Overview
Due to its 8-WFDFN Exposed Pad, CSP packaging, the electronic part is convenient for international shipping. Advanced packaging method Tray is used to provide high reliability. It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Operational temperature extended around -40°C~85°C TA. Total terminations are 8. A 2 channel electronic part produces high-quality output. A 5V voltage supply should turn on and run the electronic component. There is an electrical component included in the 8 series. SPDT switching circuits are used in these analog switch ics. The circuits in this analogue multiplexer number 1. Try searching for the analog switch ic with ADV3219 if you are looking for variants. As far as internal resistance is concerned, it has 20mOhm. You can find the functions of the 8 pins in the datasheets. Multiplexer or Switches is a typical switch device. For this multiplexer, dual supply voltage is feasible, but it should not exceed 5.5V. In the case of dual power supplies, you should connect at least 4.5V. There is an integrated analog IC ANALOG CIRCUIT in the module. There is a voltage range of 5V operating voltages for the electrical part. 800MHz bandwidths enable data to be transferred.
ADV3219ACPZ Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 840MHz
Bandwidth: 800MHz
ADV3219ACPZ Applications
There are a lot of Analog Devices Inc. ADV3219ACPZ Analog Switches & Multiplexers ICs applications.
- Automatic test equipment
- CSU
- Industrial and process control systems
- Medical systems
- Video switching
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Digital access cross connects
- USB 1.1 signal switching circuits
- Multi-Line E1 Interface Cards
- Access Concentrators
