ADV3219ACPZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADV3219 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Bandwidth | 800MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 5.5V |
| -3db Bandwidth | 840MHz |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 2μA Typ |
| Channel Capacitance (CS(off), CD(off)) | 0.6pF |
| Switch Circuit | SPDT |
| Crosstalk | -70dB @ 100MHz |
| Voltage - Supply, Dual (V±) | ±4.5V~5.5V |
| Height Seated (Max) | 0.9mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADV3219ACPZ-RL Overview
Packed in 8-WFDFN Exposed Pad, CSP, the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Increasing operating temperature to around -40°C~85°C TA. A total of 8 terminations have been recorded. As a result of its 2 channels, this electronic component provides high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. This electrical component is included in the 8 series of products. On the other hand, analog switches can be constructed using SPDT switching circuits. 1 circuits are used in this analogue multiplexer. Try searching for the analog switch ic with ADV3219 if you are looking for variants. Please refer to the datasheets for 8 pins functions. There is Multiplexer or Switches analog multiplexer like this in the world. If put voltage greater than 5.5V on the multiplexer, damage may be caused to the device. The voltage should be at least 4.5V if you are using dual power supplies. A ANALOG CIRCUIT analog IC is integrated into the board. Operating voltages of 5V are compatible with the electrical part. The transfer of data can be performed over 800MHz bandwidths.
ADV3219ACPZ-RL Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 840MHz
Bandwidth: 800MHz
ADV3219ACPZ-RL Applications
There are a lot of Analog Devices Inc. ADV3219ACPZ-RL Analog Switches & Multiplexers ICs applications.
- PDAs
- Fiber In The Loop (FITL)
- Relay Replacement
- Microprocessor controlled systems
- Intelligent PBX
- Battery Powered Systems
- Automotive applications
- Frame Relay Equipment
- Public switching systems
- SDH
