AFE5851IRGCR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 210.013267mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | 3A991.C.2 |
| Type | General Purpose |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES ON 3V SUPPLY |
| Max Power Dissipation | 633mW |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AFE5851 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 16 |
| Interface | LVDS, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of Bits | 12 |
| Resolution | 1.5 B |
| Sampling Rate | 65 Msps |
| Voltage - Supply, Analog | 1.7V~1.9V 3V~3.6V |
| Voltage - Supply, Digital | 1.7V~1.9V |
| Number of A/D Converters | 8 |
| Conversion Rate | 65 Msps |
| Signal to Noise Ratio (SNR) | 66 dB |
| Max Supply Voltage (DC) | 1.9V |
| Min Supply Voltage (DC) | 1.7V |
| Spurious-free dynamic range (SFDR) | 55 dB |
| Height | 1mm |
| Length | 9mm |
| Width | 9mm |
| Thickness | 880μm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AFE5851IRGCR Overview
It is packaged in a way that resembles 64-VFQFN Exposed Pad.12 Bits were used to design this electronic part.As part of Tape & Reel (TR), it is embedded.In 64 terminations, the transmission line is terminated with a device that matches its characteristic impedance.Using 1.7V~1.9V 3V~3.6V, this electrical device converts AC voltage into regulated DC voltage and drives a load with regulated DC power.Its supply voltage is 1.7V~1.9V.In order to establish its related parts, one needs to identify the base part number associated with the part.It is recommended to keep the supply voltage at 1.8V.In terms of its design, it has 64 pins.For the sake of reliability, it must be operated at a minimum operating temperature of -40°C.As a result, it is operating at a temperature which is maximal for its reliability, which is 85°C.64 pins are present in the device.3.6V's maximal supply voltage is supported by this device.In order to operate it, a maximum voltage of 3V must be applied.This electrical device is a General Purpose type.In microcontrollers, there are 8 A/D converters that are used to convert analog signals like voltage into digital signals which can be read and processed by a microcontroller after they have been converted into digital form.During operation, it operates at the maximum supply voltage (DC) available to 1.9V.Additionally, ALSO OPERATES ON 3V SUPPLY contributes to its characteristics as well.A minimal supply voltage of 12V (DC) is needed for this device to operate.
AFE5851IRGCR Features
AFE5851IRGCR Applications
There are a lot of Texas Instruments AFE5851IRGCR AFE applications.
- Wireless and wired broadband communications
- 4-channel data acquisition
- Scientific instruments.
- Microcontrollers.
- Spectrum Analysis
- Digital beam-forming systems for ultrasound
- Digital Multimeters, PLC's (Programming Logic Controllers)
- Battery Operated Systems
- Multicarrier, multimode digital receivers
- Imaging Systems
