AGX105F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Material | Cadmium, Silver |
| Mounting Type | Panel Mount, Snap-In |
| Surface Mount | NO |
| Operating Temperature | -25°C~85°C |
| Packaging | Bulk |
| Published | 2006 |
| Series | AGX |
| Feature | Cadmium Free |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Quick Connect |
| Additional Feature | UL, CSA, VDE, SEMKO APPROVED |
| Voltage - Rated DC | 30V |
| Current Rating (Amps) | 10A AC 6A DC |
| Ingress Protection | IP40 |
| Reach Compliance Code | unknown |
| Current Rating | 10.1A |
| Termination Style | Quick Connect - 0.250 (6.3mm) |
| Voltage - Rated AC | 250V |
| Body Length or Diameter | 27.0002mm |
| Body Breadth | 14.605 mm |
| Actuator Type | Round (Pin Plunger) |
| Circuit | SPST-NO |
| Switch Function | Off-Mom |
| Contact Resistance | 0.1mOhm |
| Insulation Resistance | 100000000Ohm |
| Contact Current(DC)-Max | 6A |
| Contact Voltage(DC)-Max | 30V |
| Dielectric Withstanding Voltage | 2500VRMS V |
| Electrical Life | 100,000 Cycles |
| Mechanical Life | 1,000,000 Cycles |
| Switch Type | SNAP ACTING/LIMIT SWITCH |
| Contact Current Rating | 10.1A |
| Operating Force | 400gf |
| Contact (AC) Max Rating R Load | 10.1A@250VAC |
| Contact Timing | SNAP ACTION |
| Overtravel | 0.079 (2.0mm) |
| Operating Position | 0.189 (4.8mm) |
| Body Height | 22.5044mm |
| Actuator Length | 0.315 inch |
| RoHS Status | RoHS Compliant |
See Relate Datesheet
