AH284-WL-7
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Fan Motor Driver |
| Additional Feature | INPUT VOLTAGE LIMIT-MAX=24 |
| HTS Code | 8542.39.00.01 |
| Technology | Power MOSFET |
| Voltage - Supply | 3.8V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.95mm |
| Current Rating | 500mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AH284 |
| JESD-30 Code | R-PDSO-G5 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 20V |
| Supply Voltage-Min (Vsup) | 3.8V |
| Interface | On/Off |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Output Configuration | Low Side (2) |
| Logic Function | AND |
| Output Current-Max | 0.7A |
| Voltage - Load | 3.8V~20V |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 1.2mm |
| Length | 3mm |
| Width | 1.7mm |
AH284-WL-7 Overview
The design includes a package of type [0].Parts are packaged in TO-236-3, SC-59, SOT-23-3cases.The part should be mounted by Surface Mount.I believe it is suitable for the component connected to Fan Motor Driver.There is a possibility of providing 3.8V~20Vvolts through the device.A range of -40°C~150°C TJis available for operating temperature.A Brushless DC (BLDC)motor can be classified as a type of motor.There are 5 terminations available in the part.If the voltage is applied to the load at the rate of [0], the load will be affected.Drivers controllers is recommended that this amplifier be run at 12V.The recommended way to mount it is Surface Mount.The device employs the BRUSHLESS DC MOTOR CONTROLLER analog IC.This can be determined by looking at the AH284 part number.The supply voltage for this driver is 20V.There is also a characteristic INPUT VOLTAGE LIMIT-MAX=24associated with it.
AH284-WL-7 Features
Applications : Fan Motor Driver
Load voltage across the chip 3.8V~20V
base on AH284 number
Additional Feature: INPUT VOLTAGE LIMIT-MAX=24
AH284-WL-7 Applications
There are a lot of Diodes Incorporated AH284-WL-7 motor drivers applications.
- Lighting for the ambience of tunability
- Horticultural applications
- Running preventive- maintenance diagnostics
- Dome
- RGB and monochromatic LED drivers for signage and traffic signals
- High brightness LED lighting
- Human-centric lighting
- Horticultural lighting
- Home lighting systems
- LED bias
