AH286-WL-7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Fan Motor Driver |
| Additional Feature | INPUT VOLTAGE LIMIT-MAX=24 |
| HTS Code | 8542.39.00.01 |
| Technology | Power MOSFET |
| Voltage - Supply | 3.8V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.95mm |
| Current Rating | 2mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AH286 |
| JESD-30 Code | R-PDSO-G5 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 20V |
| Supply Voltage-Min (Vsup) | 3.8V |
| Interface | On/Off |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Output Configuration | Low Side (2) |
| Current - Output | 500mA |
| Logic Function | AND |
| Voltage - Load | 3.8V~20V |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 1.2mm |
| Length | 3mm |
| Width | 1.7mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AH286-WL-7 Overview
This package is designed to work with [0].This part is packaged with a case of [0].Surface Mountshould be used for mounting the part.In this case, it is appropriate for the component connected to Fan Motor Driver.This device is capable of supplying voltages up to 3.8V~20V volts.This device operates at a temperature of -40°C~150°C TJ.In this case, the motor type is Brushless DC (BLDC).There are 5 terminations available on this part.Voltage can be applied at a rate of 3.8V~20V volts to the load.Drivers controllers is important to note that this amplifier should be operated at the 12Vsetting.The recommended mounting method is Surface Mount.Maintain a current of 500mAfor the part output.The device utilizes the IC BRUSHLESS DC MOTOR CONTROLLERwhich is an analog IC.Drivers controllers is based on the AH286 part number.A voltage of 20V is used as the supply voltage for this driver.There is also a characteristic INPUT VOLTAGE LIMIT-MAX=24associated with it.
AH286-WL-7 Features
Applications : Fan Motor Driver
Load voltage across the chip 3.8V~20V
base on AH286 number
Additional Feature: INPUT VOLTAGE LIMIT-MAX=24
AH286-WL-7 Applications
There are a lot of Diodes Incorporated AH286-WL-7 motor drivers applications.
- RGB and monochromatic LED drivers for signage and traffic signals
- Scanning equipment
- Daytime running lights (DRLs)
- Commercial office
- Architectural lighting
- Brake lights
- Tail lights
- A cross between entertainment
- Camcorders
- Dash
