AH292-WL-7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Fan Motor Driver |
| Additional Feature | INPUT VOLTAGE LIMIT-MAX=8 |
| HTS Code | 8542.39.00.01 |
| Technology | Power MOSFET |
| Voltage - Supply | 1.8V~5.75V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Current Rating | 2.6mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AH292 |
| JESD-30 Code | R-PDSO-G5 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.75V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | On/Off |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Output Configuration | Low Side (2) |
| Current - Output | 400mA |
| Logic Function | AND |
| Voltage - Load | 1.8V~5.75V |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height Seated (Max) | 1.35mm |
| Length | 2.85mm |
| Width | 1.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AH292-WL-7 Overview
Drivers controllers is designed wDrivers controllersh a package of [0].The part is packaged in a TO-236-3, SC-59, SOT-23-3 case.A mounting position of Surface Mountis recommended for the part.For the component connected to [0], it is suitable.This device is capable of supplying voltages up to 1.8V~5.75V volts.A range of -20°C~150°C TJis available for operating temperature.Motors can be classified as Brushless DC (BLDC).There are 5 terminations available on this part.Drivers controllers is possible to apply voltage at a rate of 1.8V~5.75Vto the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 5V.Surface Mountis its recommended mounting method.Maintain the current output of the part at 400mA volts.A BRUSHLESS DC MOTOR CONTROLLERanalog IC is employed in this device.According to the AH292part number, the part is found.Drivers controllers is also characterized by INPUT VOLTAGE LIMIT-MAX=8.
AH292-WL-7 Features
Applications : Fan Motor Driver
Load voltage across the chip 1.8V~5.75V
base on AH292 number
Additional Feature: INPUT VOLTAGE LIMIT-MAX=8
AH292-WL-7 Applications
There are a lot of Diodes Incorporated AH292-WL-7 motor drivers applications.
- Footwell lighting
- Industrial lighting
- Indicator
- Dash
- Automotive applications
- Lighting for health and wellbeing
- Automotive exterior and interior lighting
- Handheld devices
- General lighting
- LED bias
