AH5772-P-B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 4-SIP |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Bulk |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Applications | Fan Motor Driver |
| Additional Feature | SOURCE ERROR L1; SEATED HIGHT CALCULATED |
| Technology | Power MOSFET |
| Voltage - Supply | 2.4V~18V |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Operating Supply Voltage | 20V |
| Supply Voltage-Max (Vsup) | 18V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Output Configuration | Half Bridge (2) |
| Max Supply Current | 4.5mA |
| Current - Output | 1A |
| Logic Function | AND |
| Voltage - Load | 2.4V~18V |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height Seated (Max) | 5.17mm |
| Length | 5.22mm |
| Width | 1.56mm |
| RoHS Status | ROHS3 Compliant |
AH5772-P-B Overview
The package is designed with [0].Drivers controllers comes in a 4-SIP case.In general, it is recommended that the part be mounted by Through Hole.I believe it is suitable for the component connected to Fan Motor Driver.This device is capable of supplying voltages up to 2.4V~18V volts.A range of -40°C~150°C TJis available for operating temperature.There is a motor type Brushless DC (BLDC)available.The part has 4terminations available.If the voltage is applied to the load at the rate of [0], the load will be affected.The amplifier should be set to 12V.Ideally, it should be mounted in the Through Holeposition.Drivers controllers is recommended to keep the part output current at 1A.A ANALOG CIRCUITanalog integrated circuit is employed in the device.4pins are available on the device.There is 20V supply voltage required for this driver.Also, SOURCE ERROR L1; SEATED HIGHT CALCULATEDcan be found as a characteristic of this type.
AH5772-P-B Features
Applications : Fan Motor Driver
Load voltage across the chip 2.4V~18V
Additional Feature: SOURCE ERROR L1; SEATED HIGHT CALCULATED
AH5772-P-B Applications
There are a lot of Diodes Incorporated AH5772-P-B motor drivers applications.
- LED ballasts
- Dome
- General lighting
- A cross between entertainment
- Building technology
- Smart lighting applications
- Footwell lighting
- Display LED backlighting
- Hospitality buildings
- Dash
