AIC111RHB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 72.206235mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | microPOWER™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Voice-Band |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.3V |
| Base Part Number | AIC111 |
| Output | VOLTAGE |
| Pin Count | 32 |
| Operating Supply Voltage | 1.3V |
| Number of Channels | 1 |
| Interface | SPI, Serial |
| Max Supply Voltage | 1.5V |
| Min Supply Voltage | 1.1V |
| Nominal Supply Current | 350μA |
| Number of Bits | 16 |
| Data Interface | Serial |
| Sampling Rate | 40 ksps |
| Voltage - Supply, Analog | 1.1V~1.5V |
| Voltage - Supply, Digital | 1.1V~1.5V |
| Signal to Noise Ratio (SNR) | 87 dB |
| Number of D/A Converters | 1 |
| Resolution (Bits) | 16 b |
| Number of Analog Inputs | 2 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 1 |
| Filter | YES |
| Output Code | BINARY |
| Input Code | BINARY |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AIC111RHB Overview
Space-saving is achieved by supplying it in the 32-VFQFN Exposed Pad package. Tube packaging method is used. This electronic component is of the type Voice-Band, allowing it to provide high-efficiency performance in various applications. Mounting type Surface Mount is used. At 0°C~70°C, it can operate normally. 1 / 1 ADC / DAC is integrated into it. Supply voltage is 1.1V~1.5V for the analog circuit. It is supplied with a voltage of 1.1V~1.5V to power the digital circuit. 32 terminations prevent signals from reflecting off transmission lines. 32-pin electronic devices are what it is. The board is configured with 32 pins. More related parts can be found by using its base part number AIC111. Supply voltage should be maintained at 1.5V. It is recommended to maintain a voltage of 1.1V as the minimum value. There is no supply voltage for it. When the supply voltage is 1.3V, it can operate. Digital signals are converted into analog signals with 1 D/A converters. Data transmission is achieved through 1 channels. Information is stored with 16 bits. There are a variety of applications for this electronic part from the microPOWER? series. The device has 2 analog inputs. At any given time, the circuit is expected to carry an electrical current of 350μA.
AIC111RHB Features
Embedded in the 32-VFQFN Exposed Pad package
Operating temperature of 0°C~70°C
1 / 1 ADCs / DACs
2 analog inputs
AIC111RHB Applications
There are a lot of Texas Instruments AIC111RHB CODECs Interface ICs applications.
- Image denoising
- Advanced breast cancer treatments
- Aerospace
- Robotics
- Web tensioning
- Timber products
- Off-Highway Vehicles (OHV)
- Demultiplexing
- Robotics vehicle with the metal detector
- RF-based home automation system
