AL3159FSG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-UQFN Exposed Pad |
| Number of Pins | 20 |
| Weight | 123.008581mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.4mm |
| Frequency | 1.2MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AL3159 |
| Pin Count | 20 |
| Number of Outputs | 9 |
| Output Voltage | 11V |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 20mA |
| Topology | Switched Capacitor (Charge Pump) |
| Output Current per Channel | 20mA |
| Internal Switch(s) | Yes |
| Voltage - Supply (Min) | 2.7V |
| Height Seated (Max) | 0.63mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AL3159FSG-7 Overview
Space is saved using its 20-UQFN Exposed Pad package. LED drivers designed using this technology use 9 outputs.It is mounted using Surface Mount.This emerges as a DC DC Regulator with high efficiency and reliability.When the temperature is -40°C~85°C TA, it can work normally.There are many benefits for Backlight.In this case, the frequency is 1.2MHz.20 terminations are used in its operation.There are 20 pins used to form the base of its configuration.It is likely that undetermined failures will occur if the voltage supply is less than 2.7V.I have mounted it by Surface Mount.The LED driver is available under the part number AL3159.It is acceptable for the voltage to be 5.5V.20 pins are included in it.It works with the minimal supply voltage of 2.7V to meet highest efficiency standards.It is possible to supply the load with 20mA current.The voltage at the output terminal is 11V.Device operation requires 3.6V volts from the circuit.
AL3159FSG-7 Features
Available in the 20-UQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Output voltage of 11V
AL3159FSG-7 Applications
There are a lot of Diodes Incorporated AL3159FSG-7 LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- Dimmable LED for vehicle interiors
- Medical surgery lighting
- Street lighting
- Stage Lighting and Signage
- Constant Voltage Power Source for portable equipment
- Industrial LED Lighting: Image Recognition Devices
- Scanners and Handy Terminals
- LED headlights
- High-end retail lighting
