AL5801W6-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.05W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Frequency | 200Hz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AL5801 |
| Number of Outputs | 1 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 3.5V |
| Power Dissipation | 1.05W |
| Output Current | 350mA |
| Voltage - Output | 1.1V~100V |
| Min Input Voltage | 3.5V |
| Max Input Voltage | 20V |
| Output Current per Channel | 350mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 2 |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AL5801W6-7 Overview
To save board space, it uses the SOT-23-6 package. It has 1 outputs for LED drivers.The led light driver is mounted using Surface Mount.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.The led light driver can work at -40°C~125°C TA.Signage benefits significantly from the program.A frequency of 200Hz is used to operate it.6 terminations are used in its operation.There are 6 pins on its base.There are 2 segments in it.The mount is in the direction of Surface Mount.LED drivers are found under the base part number AL5801.An acceptable maximum value for the supply voltage is 20V.The output voltage of this device is 1.1V~100V.Depending on its characteristics, it is classified into Display Drivers.A minimal input voltage of 3.5V is required for it to operate.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 3.5V.20V is the maximum value of the supply current.Loads can only be powered by 350mA current.
AL5801W6-7 Features
Available in the SOT-23-6 package
Operating temperature of -40°C~125°C TA
Frequency of 200Hz
AL5801W6-7 Applications
There are a lot of Diodes Incorporated AL5801W6-7 LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Panel lighting
- LED backlight driver for LCD displays for portable equipment
- Museum lighting
- LED Lighting PFCs, Linear Dimmable
- White LED Backlight for portable equipment
- Industrial LED Lighting: Image Recognition Devices
- Linear fluorescent
- Street lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
