AL5809-30S1-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOD-123 |
| Number of Pins | 2 |
| Supplier Device Package | SOD-123 |
| Weight | 10.007382mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | Linear |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Signage |
| Max Power Dissipation | 360mW |
| Number of Outputs | 1 |
| Max Output Current | 30mA |
| Number of Channels | 1 |
| Max Supply Voltage | 60V |
| Output Current | 30mA |
| Voltage - Output | 60V |
| Topology | Boost |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 60V |
| Output Current per Channel | 30mA |
| Current - Output / Channel | 30mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Voltage - Supply (Max) | 60V |
| Voltage - Supply (Min) | 2.5V |
| Height | 1.35mm |
| Length | 2.85mm |
| Width | 1.7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AL5809-30S1-7 Overview
To save space on the board, it has a SOD-123 package. LED drivers designed using this technology use 1 outputs.In this case, mounting method is Surface Mount.With high efficiency and reliable performance, it emerges as a Linear.The led light driver is capable of working normally at -40°C~125°C TA.Taking advantage of Signage has considerable benefits.The LED light driver has a base configuration of 2 pins.A voltage supply below 2.5V may cause undetermined failures.It has been mounted on Surface Mount.60V is an acceptable voltage.The voltage output by it is 60V.It supports a maximum value of 60V.With a minimum input voltage of 2.5V volts, it can operate.There is 60V maximum value for supply current.Operating temperatures should not exceed 125°C in order to ensure stable operation.There is no current available to supply to the load.Stable operation requires an operating temperature greater than -40°C.When operating with a maximum output current of 30mA, it can deliver all the benefits of a LED driver.A total of 1 channels are currently available for transmission.
AL5809-30S1-7 Features
Available in the SOD-123 package
Operating temperature of -40°C~125°C TA
AL5809-30S1-7 Applications
There are a lot of Diodes Incorporated AL5809-30S1-7 LED Driver ICs applications.
- Gallery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Amusement Machines
- High-end retail lighting
- Constant Voltage Power Source for portable equipment
- Auxiliary lights for on-vehicle cameras
- LED Lighting PFCs, Linear Dimmable
- Panel lighting
- Scanners and Handy Terminals
- Other Electronic Devices
