AL5811MP-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Signage |
| Max Power Dissipation | 1.2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | AL5811 |
| Max Output Current | 75mA |
| Max Supply Voltage | 60V |
| Min Supply Voltage | 3.5V |
| Nominal Supply Current | 350μA |
| Max Supply Current | 350μA |
| Max Output Voltage | 60V |
| Voltage - Output | 1V~60V |
| Min Input Voltage | 3.5V |
| Max Input Voltage | 60V |
| Output Current per Channel | 75mA |
| Min Output Voltage | 1V |
| Current - Output / Channel | 75mA |
| Internal Switch(s) | Yes |
| Number of LEDs | 1 |
| Dimming | PWM |
| Number of Segments | 2 |
| Multiplexed Display Capability | NO |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.05mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AL5811MP-13 Overview
Its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package is used to save board space. It adopts the way of Surface Mount for mounting.The system emerges as a Linear with high efficiency.It is able to work normally at the operating temperature of -40°C~125°C TA.It provides considerable benefits for Signage.It operates with 8 terminations.The base is configured with 8 pins.It is estimated that there are 2 segments.As you can see, it is mounted by Surface Mount.This LED driver has the part number AL5811.There is no maximum value acceptable for the supply voltage, so 60V is acceptable.In this device, the output voltage is 1V~60V volts.A minimal input voltage of 3.5V is required for it to operate.For maximum efficiency, it requires a minimal supply voltage of 3.5V.Currently, the supply current can only reach 60V.This device is able to provide high efficiency when the maximal supply current should be less than 350μA.A LED driver that operates at 75mA output current provides all the benefits of a LED driver.Voltages should not exceed 60V volts at the output.A minimum voltage of 1V is maintained by its output.
AL5811MP-13 Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Supply voltage of 3.5V
AL5811MP-13 Applications
There are a lot of Diodes Incorporated AL5811MP-13 LED Driver ICs applications.
- Linear fluorescent
- Other Electronic Devices
- Gallery lighting
- Flicker-free LED Lighting using R1580N
- Refrigeration lighting
- Dimmable LED for vehicle interiors
- Scanners and Handy Terminals
- A- lamps
- High-end retail lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
