AL5812FF-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2014 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 366mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AL5812 |
| Number of Outputs | 1 |
| Max Supply Voltage | 60V |
| Min Supply Voltage | 3.5V |
| Nominal Supply Current | 400μA |
| Power Dissipation | 1.47W |
| Max Supply Current | 500μA |
| Voltage - Output | 1V~60V |
| Output Current per Channel | 150mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Voltage - Supply (Min) | 3.5V |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AL5812FF-7 Overview
Board space is saved by its 6-UDFN Exposed Pad package.This LED driver has 1 outputs.The mounting method adopted is Surface Mount.It emerges as a Linear with high efficiency.LED drivers capable of operating at -40°C~125°C TA can be used.Signage has considerable advantages.A termination of 6 is used to operate the LED driver.To form its configuration, there are 6 pins.In the absence of a voltage supply of at least 3.5V, undetermined failures may occur.It has been mounted on Surface Mount.Under the base part number AL5812, you will find this LED driver.As a maximum value, 60V is acceptable.The device has a voltage output of 1V~60V volts.Further, its characteristics allow it to be classified as Display Drivers.The system operates at a minimum supply voltage of 3.5V in order to achieve maximum efficiency.As long as the maximum supply current is under 500μA, it can deliver high efficiency.
AL5812FF-7 Features
Available in the 6-UDFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Supply voltage of 3.5V
AL5812FF-7 Applications
There are a lot of Diodes Incorporated AL5812FF-7 LED Driver ICs applications.
- Sports Facility Lighting
- Amusement Machines
- Down lighting
- Replacement lamps
- Panel lighting
- Auxiliary lights for on-vehicle cameras
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Dimmable LED for vehicle interiors
- LED headlights
