AL8400SE-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 310mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AL8400 |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Number of Outputs | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.2V |
| Nominal Supply Current | 1.5mA |
| Output Current | 15mA |
| Max Supply Current | 1.5mA |
| Voltage - Output | 0.2V~18V |
| Min Input Voltage | 2.2V |
| Max Input Voltage | 18V |
| Internal Switch(s) | No |
| Number of Segments | 3 |
| Switching Frequency | 600kHz |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AL8400SE-7 Overview
In order to save board space, the led driver uses the 5-TSSOP, SC-70-5, SOT-353 package. For the design of this LED driver, 1 outputs are used.We are using Surface Mount as the mounting method.There is no doubt that this is a very efficient and reliable Linear.At -40°C~125°C TA, the led driver is capable of operating.Taking advantage of Signage has considerable benefits.There are 5 terminations associated with it.This configuration is built upon 4 pins.The number of segments is estimated to be 3.It's mounted by Surface Mount.It's under the AL8400 base part number.A maximum supply voltage of 18V is acceptable.A 0.2V~18V volt output voltage is provided by this device.The device has 5 pins.As a result, it can also be classified as Display Drivers.With 2.2V as the minimal input voltage, it operates.The maximum efficiency can be achieved by operating it at a minimal voltage of 2.2V.There is 18V maximum value for supply current.If the maximum supply current is less than 1.5mA, the device is capable of providing high efficiency.A load can be supplied with 15mA current.The electronic component can fully perform its functions if the switching frequency is maintained at 600kHz.
AL8400SE-7 Features
Available in the 5-TSSOP, SC-70-5, SOT-353 package
Operating temperature of -40°C~125°C TA
Supply voltage of 3V
Switching frequency of 600kHz
AL8400SE-7 Applications
There are a lot of Diodes Incorporated AL8400SE-7 LED Driver ICs applications.
- Gallery lighting
- LED Lighting PFCs, Linear Dimmable
- Portable lighting
- Refrigeration lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Scanners and Handy Terminals
- Stage Lighting and Signage
- Panel lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Down lighting
