AL8807MP-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Current Rating | 1.3A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AL8807 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 36V |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 6V |
| Nominal Supply Current | 5mA |
| Output Current | 1.3A |
| Max Supply Current | 5mA |
| Max Output Voltage | 36V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 6V |
| Max Input Voltage | 36V |
| Output Current per Channel | 1.3A |
| Current - Output / Channel | 1.3A Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Number of Segments | 8 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Length | 2.95mm |
| Width | 2.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AL8807MP-13 Overview
Space is saved using its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package. LED drivers designed using this technology use 1 outputs.To mount, use Surface Mount.It is highly reliable and high-performing when it emerges as a DC DC Regulator.It is possible for the led driver ic to function normally at -40°C~125°C TJ.In this case, there are 8 terminations.This configuration is built upon 8 pins.In total, it includes 8 segments.There is a mounting of it by Surface Mount.It is under the base part number AL8807 that you can find this LED driver.It is acceptable to operate with a supply voltage of 36V.There are 8 pins on it.The Display Drivers is also assigned based on its characteristics.A voltage of 6V is its minimal input voltage.To meet the highest efficiency standards, it can be operated with a minimum supply voltage of 6V.Supply current is limited to 36V at its maximum value.With a minimum supply current less than 5mA, this device achieves high efficiency.Loads can only be powered by 1.3A current.It is capable of fulfilling its full functionality when the switching frequency remains at 1MHz.36V is the voltage at the output terminal.It is not recommended to exceed 36V in the output voltage.
AL8807MP-13 Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Supply voltage of 12V
Switching frequency of 1MHz
Output voltage of 36V
AL8807MP-13 Applications
There are a lot of Diodes Incorporated AL8807MP-13 LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- Architectural lighting
- Stage and Studio lighting
- Down lighting
- LED Lightings for Inspection Devices
- Linear fluorescent
- Dimmable LED for vehicle interiors
- High-end retail lighting
- LED Lightings for Industrial Equipment
- Street lighting
