AL9910-5S-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Applications | Backlight, Lighting, Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 630mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 20V |
| Frequency | 25kHz~300kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AL9910 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 7.5V |
| Operating Supply Voltage | 7.5V |
| Max Supply Voltage | 10V |
| Nominal Supply Current | 500μA |
| Power Dissipation | 630mW |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Output Current per Channel | 190mA |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Number of Segments | 2 |
| Voltage - Supply (Max) | 500V |
| Voltage - Supply (Min) | 15V |
| Multiplexed Display Capability | NO |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AL9910-5S-13 Overview
Using its 8-SOIC (0.154, 3.90mm Width) package, it is possible to save board space. These LED drivers have 1 outputs.The mounting method adopted is Surface Mount.This emerges as a AC DC Offline Switcher with high efficiency and reliability.When the temperature is -40°C~85°C TA, it can work normally.There are many benefits for Backlight, Lighting, Signage.It operates based on the frequency of 25kHz~300kHz.In this case, it uses 8 terminations.This LED driver is configured with a base of 8 pins.A voltage supply below 15V may cause undetermined failures.There are estimated to be 2 segments.It has been mounted on Surface Mount.It's under the AL9910 base part number.Ideally, the supply voltage should be 10V.There are 8 pins on it.It is designed to provide a supply voltage of 500V at its maximum.Depending on its characteristics, it is classified into Display Drivers.The power of systems depends on having 7.5V voltages inside.7.5V is the voltage at the output terminal.
AL9910-5S-13 Features
Available in the 8-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 25kHz~300kHz
Supply voltage of 20V
Operating with the supply voltage of 7.5V
Output voltage of 7.5V
AL9910-5S-13 Applications
There are a lot of Diodes Incorporated AL9910-5S-13 LED Driver ICs applications.
- Medical surgery lighting
- A- lamps
- Stage and Studio lighting
- LED Lightings for Industrial Equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Linear fluorescent
- LED backlight driver for LCD displays for portable equipment
- Dimmable LED for vehicle interiors
- Street lighting
- Amusement Machines
