ALD2301BPAL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Supplier Device Package | 8-PDIP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1998 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 600mW |
| Output Type | CMOS, NMOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 18μA |
| Output Current | 60mA |
| Max Supply Current | 18μA |
| Quiescent Current | 180μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 5mV |
| Input Bias Current | 200pA |
| Current - Quiescent (Max) | 180μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 200pA @ 5V |
| Current - Output (Typ) | 60mA |
| RoHS Status | ROHS3 Compliant |
ALD2301BPAL Overview
In order to make transportation easier, it is packaged in 8-DIP (0.300, 7.62mm) .There is a comparator of type CMOS, NMOS, Open-Drain, TTL output on this device.The part is shipped by Tube .In terms of type, this is a typical General Purpose comparator.There are a total of 2 elements in it.The recommended mounting method is Through Hole .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .There are 8 pins on the comparator.There is a quiescent current of 180μA in this comparator.The PCB or other board can be mounted using the Through Hole on it.For normal use of the device, the nominal supply current should be 18μA .Current supply exceeding 18μA could cause disfunction of the compartator.Temperature higher than 70°C is not recommended.Comparator electronics is not suComparator electronicsable for temperatures below 0°C .The maximal supply voltage of the comparator is 12V .A minimum supply voltage of 3V is permitted for this comparator.As a result, 2 channels work together to maintain the quality of the output.
ALD2301BPAL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
ALD2301BPAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2301BPAL linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Zero-Crossing Detectors
- Metering Systems
- Notebooks and PDAs
- Window Comparators
- Factory automation & control
- Power Supervision
- Current and voltage sensing
- Lithium ion battery monitoring
- General-Purpose Portable Devices
