banner_page

ALD2301BSAL

Surface Mount Tube 60mA mA 650 ns μs Linear Comparators 200pA pA 1998 18μA μA 5mV mV Surface Mount


  • Manufacturer: Advanced Linear Devices Inc.
  • Nocochips NO: 16-ALD2301BSAL
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 519
  • Description: Surface Mount Tube 60mA mA 650 ns μs Linear Comparators 200pA pA 1998 18μA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Voltage - Input Offset (Max) 5mV @ 5V
Current - Input Bias (Max) 200pA @ 5V
Current - Output (Typ) 60mA
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Supplier Device Package 8-SOIC
Operating Temperature 0°C~70°C
Packaging Tube
Published 1998
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type General Purpose
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Max Power Dissipation 600mW
Output Type CMOS, NMOS, Open-Drain, TTL
Number of Elements 2
Number of Channels 2
Max Supply Voltage 12V
Min Supply Voltage 3V
Nominal Supply Current 18μA
Output Current 60mA
Max Supply Current 18μA
Quiescent Current 180μA
Response Time 650 ns
Voltage - Supply, Single/Dual (±) 3V~10V ±1.5V~5V
Output Current per Channel 60mA
Input Offset Voltage (Vos) 5mV
Input Bias Current 200pA
Current - Quiescent (Max) 180μA

ALD2301BSAL Overview


A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, NMOS, Open-Drain, TTL output type for this comparator.Electronic comparator is shipped by Tube .A comparator of this type is typically of type General Purpose .Currently, it consists of only 2 elements.A Surface Mount mounting type is recommended.Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.The comparator has a pin count of 8 .As a result, this comparator displays a quiescent current of 180μA .The PCB or other board has a Surface Mount for mounting.Normal use of the device should require a nominal supply current of 18μA .If the current supply exceeds 18μA , the comparator might be damaged.There is no need to exceed 70°C in terms of temperature.Temperatures below 0°C are not suitable for the device.12V is the maximum supply voltage of the comparator.Comparator electronics is possible to supply this comparator wComparator electronicsh a voltage as low as 3V .2 channels cooperate together to maintain the output quality.

ALD2301BSAL Features


CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA

ALD2301BSAL Applications


There are a lot of Advanced Linear Devices Inc. ALD2301BSAL linear comparators applications.

  • Self-diagnostics
  • Infotainment and Clusters
  • Window Comparators, Multivibrators
  • Alarm and Monitoring Circuits
  • Simple Analog-to-Digital Converters (ADCs)
  • DC/DC and AC/DC power supplies
  • RC Timers
  • Laptop Computers
  • Power management
  • Motor drives

Write a review

Note: HTML is not translated!
    Bad           Good