ALD2301CSAL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1998 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 600mW |
| Output Type | CMOS, NMOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 18μA |
| Output Current | 60mA |
| Max Supply Current | 18μA |
| Quiescent Current | 180μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 20mV |
| Input Bias Current | 4pA |
| Current - Quiescent (Max) | 180μA |
| Voltage - Input Offset (Max) | 20mV @ 5V |
| Current - Input Bias (Max) | 4pA @ 5V |
| Current - Output (Typ) | 60mA |
| RoHS Status | ROHS3 Compliant |
ALD2301CSAL Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a CMOS, NMOS, Open-Drain, TTL output.The chip is packaged with Tube .Electronic comparator is possible to classify the chip as General Purpose .There are a total of 2 elements in it.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.8 pins are present on the comparator.There is 180μA current flowing in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 18μA when using the device.A supply current exceeding 18μA may result in the comparator malfunctioning.Temperature higher than 70°C is not recommended.Temperatures below 0°C are not suitable for the device.In the comparator, the maximum supply voltage is 12V .Comparator electronics is possible to operate this comparator wComparator electronicsh a minimum supply voltage of 3V .The output quality is maintained by the cooperation of 2 channels.
ALD2301CSAL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
ALD2301CSAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2301CSAL linear comparators applications.
- Battery-Powered Electronics
- Automatic Test Equipment
- Battery management and protection
- Battery-Powered Electronics
- Alarm and Monitoring Circuits
- RC Timers
- Window Comparators
- General Purpose Low Voltage Applications
- Pulse, Squarewave, and Time Delay Generators
- Hand-Held Electronics
