ALD2301PAL
| Parameters | |
|---|---|
| Current - Quiescent (Max) | 180μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Current - Input Bias (Max) | 200pA @ 5V |
| Current - Output (Typ) | 60mA |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Supplier Device Package | 8-PDIP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1998 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 600mW |
| Output Type | CMOS, NMOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 18μA |
| Output Current | 60mA |
| Max Supply Current | 18μA |
| Quiescent Current | 180μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 10mV |
| Input Bias Current | 200pA |
ALD2301PAL Overview
The product is packaged in 8-DIP (0.300, 7.62mm) in order to facilitate transportation.The comparator has a type CMOS, NMOS, Open-Drain, TTL output.This device is designed in Tube case.Speaking of types, this is a typical General Purpose comparator.Electronic comparator has a total of 2 elements.Electronic comparator is recommended to mount using type Through Hole .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.8 pins are present on the comparator.There is a quiescent current of 180μA in this comparator.A Through Hole is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 18μA .A current supply greater than 18μA may cause the comparator to malfunction.Comparator electronics is not recommended to operate the system at a temperature above 70°C .A temperature lower than 0°C is unsuitable for the device.A comparator's maximum supply voltage is 12V volts.A minimum supply voltage of 3V is allowed for this comparator.The output quality is maintained by the cooperation of 2 channels.
ALD2301PAL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
ALD2301PAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2301PAL linear comparators applications.
- Mobile Phones
- Pulse, Squarewave, and Time Delay Generators
- Mobile Phones and Tablets
- Threshold Detectors
- Wireless Base Stations
- Power Supervision
- Body Control Modules
- Notebooks and PDAs
- High-Speed Differential Line Receiver
- RC Timers
