ALD2301SAL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1998 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 600mW |
| Output Type | CMOS, NMOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 18μA |
| Output Current | 60mA |
| Max Supply Current | 18μA |
| Quiescent Current | 180μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 10mV |
| Max Input Current | 200pA |
| Input Bias Current | 200pA |
| Current - Quiescent (Max) | 180μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Current - Input Bias (Max) | 200pA @ 5V |
| Current - Output (Typ) | 60mA |
| RoHS Status | ROHS3 Compliant |
ALD2301SAL Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.Output type of this comparator is CMOS, NMOS, Open-Drain, TTL .The part will be shipped by Tube .In general, the chip type can be classified as General Purpose .There are a total of 2 elements in it.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator has 8 pins.A quiescent current of 180μA is observed in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 18μA .A current supply greater than 18μA may cause the comparator to malfunction.Electronic comparator is possible to input up to 200pA current into the device.Temperature higher than 70°C is not recommended.Comparator electronics cannot be operated at temperatures below 0°C .A comparator's maximum supply voltage is 12V .There is a minimum supply voltage of 3V for this comparator.The output quality of 2 channels is maintained by cooperating with each other.
ALD2301SAL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
ALD2301SAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2301SAL linear comparators applications.
- Automotive
- Consumer Medical Electronics
- Body Control Modules
- General-Purpose, Low-Voltage Applications
- Lithium ion battery monitoring
- Battery-Powered Electronics
- Wide Range VCO; MOS Clock Timers
- Wearable Devices
- Mobile Phones
- Set Top Boxes
