Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Supplier Device Package |
8-PDIP |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2005 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Type |
General Purpose |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Max Power Dissipation |
600mW |
Output Type |
CMOS, NMOS, Push-Pull, TTL |
Number of Elements |
2 |
Number of Channels |
2 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Nominal Supply Current |
500μA |
Output Current |
60mA |
Max Supply Current |
500μA |
Quiescent Current |
500μA |
Response Time |
400 ns |
Voltage - Supply, Single/Dual (±) |
4V~10V ±2V~5V |
Output Current per Channel |
60mA |
Input Offset Voltage (Vos) |
1mV |
Max Input Current |
1nA |
Input Bias Current |
200pA |
Current - Quiescent (Max) |
500μA |
Voltage - Input Offset (Max) |
1mV @ 5V |
Current - Input Bias (Max) |
0.001μA @ 5V |
Current - Output (Typ) |
60mA |
RoHS Status |
ROHS3 Compliant |
ALD2302APAL Overview
The product is packaged in 8-DIP (0.300, 7.62mm) for ease of transportation.A comparator with a CMOS, NMOS, Push-Pull, TTL output is used here.We ship the part through Tube .The type of the chip can be classified as General Purpose .Electronic comparator consists of 2 elements in total.The recommended mounting type is Through Hole .Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.The comparator is equipped with 8 pins.The comparator displays a quiescent current of 500μA .A Through Hole is provided for mounting on PCBs or other boards.The nominal supply current of the device should be 500μA for normal use.A supply current exceeding 500μA may result in the comparator malfunctioning.Electronic comparator is possible to input a maximum current of 1nA into the device.Temperatures above 70°C are not recommended.Temperatures below 0°C are not suitable for the device.A comparator's maximum supply voltage is 6V volts.Comparator electronics is possible to operate this comparator wComparator electronicsh a minimum supply voltage of 2V .For the output quality to be maintained, 2 channels work together.
ALD2302APAL Features
CMOS, NMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 500μA
ALD2302APAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2302APAL linear comparators applications.
- Laptop Computers
- Motor drives
- Self-diagnostics
- Automatic Test Equipment
- Notebooks and PDAs
- Window Comparators
- Wide Range VCO; MOS Clock Timers
- Power Supervision
- Factory automation & control
- High-Speed Sampling Circuits