Parameters |
Max Power Dissipation |
600mW |
Output Type |
CMOS, NMOS, Push-Pull, TTL |
Number of Elements |
2 |
Number of Channels |
2 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Nominal Supply Current |
500μA |
Output Current |
60mA |
Max Supply Current |
500μA |
Quiescent Current |
500μA |
Response Time |
400 ns |
Voltage - Supply, Single/Dual (±) |
4V~10V ±2V~5V |
Output Current per Channel |
60mA |
Input Offset Voltage (Vos) |
1mV |
Max Input Current |
1nA |
Input Bias Current |
200pA |
Current - Quiescent (Max) |
500μA |
Voltage - Input Offset (Max) |
1mV @ 5V |
Current - Input Bias (Max) |
0.001μA @ 5V |
Current - Output (Typ) |
60mA |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Supplier Device Package |
8-SOIC |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2005 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Type |
General Purpose |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
ALD2302ASAL Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.The comparator has an output type of CMOS, NMOS, Push-Pull, TTL .This package has been designed with Tube .It's a typical General Purpose comparator.There are a total of 2 elements in it.The type of mounting recommended is Surface Mount .The operating temperature should be set to 0°C~70°C to avoid mal-function.8 pins are available on the comparator.As a result, this comparator displays a quiescent current of 500μA .There is a Surface Mount on the board for mounting to a PCB or other board.Normal use of the device should require a nominal supply current of 500μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 500μA .The maximal current your can input into the device is 1nA .There is no recommendation for temperatures higher than 70°C .Comparator electronics cannot be operated at a temperature lower than 0°C .Comparator electronics is specified that the comparator's maximum supply voltage is 6V .This comparator allows minimum supply voltage of 2V .The output quality of 2 channels is maintained by cooperating with each other.
ALD2302ASAL Features
CMOS, NMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 500μA
ALD2302ASAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2302ASAL linear comparators applications.
- Window Comparators, Multivibrators
- Wide Range VCO; MOS Clock Timers
- Portable Battery Monitoring
- Infotainment and Clusters
- Consumer Medical Electronics
- Mobile Phones
- Set Top Boxes
- Industrial
- Appliances
- Analog front end