ALD2303APAL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Supplier Device Package | 8-PDIP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 600mW |
| Output Type | CMOS, NMOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40μA |
| Output Current | 60mA |
| Max Supply Current | 40μA |
| Quiescent Current | 40μA |
| Response Time | 6.5 μs |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 1mV |
| Input Bias Current | 1nA |
| Current - Quiescent (Max) | 40μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Current - Output (Typ) | 60mA |
| RoHS Status | ROHS3 Compliant |
ALD2303APAL Overview
A convenient packaging is provided in the form of 8-DIP (0.300, 7.62mm) .There is a comparator of type CMOS, NMOS, Open-Drain, TTL output on this device.We ship the part through Tube .It's a typical General Purpose comparator.Currently, it consists of only 2 elements.The recommended mounting type is Through Hole .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.8 pins are present on the comparator.The comparator displays a quiescent current of 40μA .The board has a Through Hole for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current of the device be 40μA .A supply current exceeding 40μA may result in the comparator malfunctioning.Temperatures above 70°C are not recommended.A temperature below 0°C is not suitable for the device.In the comparator, the maximum supply voltage is 12V .This comparator allows minimum supply voltage of 3V .To maintain output quality, 2 channels cooperate.
ALD2303APAL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 40μA
ALD2303APAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2303APAL linear comparators applications.
- Handheld Instruments
- High-Speed Differential Line Receiver
- Analog front end
- System control and monitoring
- DC/DC and AC/DC power supplies
- Alarm and Monitoring Circuits
- Ultra-Low Power Systems
- Automatic Test Equipment
- Factory automation & control
- Zero-Crossing Detectors
