Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Supplier Device Package |
8-SOIC |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2010 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Type |
General Purpose |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Max Power Dissipation |
600mW |
Output Type |
CMOS, NMOS, Open-Drain, TTL |
Number of Elements |
2 |
Number of Channels |
2 |
Max Supply Voltage |
12V |
Min Supply Voltage |
3V |
Nominal Supply Current |
40μA |
Output Current |
60mA |
Max Supply Current |
40μA |
Quiescent Current |
40μA |
Response Time |
6.5 μs |
Voltage - Supply, Single/Dual (±) |
3V~10V ±1.5V~5V |
Output Current per Channel |
60mA |
Input Offset Voltage (Vos) |
1mV |
Input Bias Current |
1nA |
Current - Quiescent (Max) |
40μA |
Voltage - Input Offset (Max) |
1mV @ 5V |
Current - Input Bias (Max) |
0.001μA @ 5V |
Current - Output (Typ) |
60mA |
RoHS Status |
ROHS3 Compliant |
ALD2303ASAL Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, NMOS, Open-Drain, TTL is being used.The part is shipped by Tube .It's a typical General Purpose comparator.Electronic comparator consists of 2 elements in total.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.8 pins are present on the comparator.The comparator presents a quiescent current of 40μA volts.There is a Surface Mount on the board for mounting to a PCB or other board.Normal operation of the device requires a nominal supply current of 40μA .A current supply greater than 40μA may result in the comparator malfunctioning.There is no recommendation for temperatures higher than 70°C .Comparator electronics cannot be used at a temperature below 0°C .The maximal supply voltage of the comparator is 12V .This comparator can be supplied with a voltage as low as 3V .The output quality is maintained by the cooperation of 2 channels.
ALD2303ASAL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 40μA
ALD2303ASAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2303ASAL linear comparators applications.
- Zero-Crossing Detectors
- Window Comparators
- Automotive
- Handheld Instruments
- Self-diagnostics
- Multivibrators and High-Voltage Digital Logic Gates
- Pulse, Squarewave, and Time Delay Generators
- System control and monitoring
- Laptop Computers
- Mobile Phones and Tablets