ALD2303SAL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 600mW |
| Output Type | CMOS, NMOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40μA |
| Output Current | 60mA |
| Max Supply Current | 40μA |
| Quiescent Current | 100μA |
| Response Time | 6.5 μs |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 4mV |
| Input Bias Current | 1nA |
| Current - Quiescent (Max) | 100μA |
| Voltage - Input Offset (Max) | 4mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Current - Output (Typ) | 60mA |
| RoHS Status | ROHS3 Compliant |
ALD2303SAL Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.Output type CMOS, NMOS, Open-Drain, TTL is used for this comparator.This chip is designed with the Tube package.Electronic comparator can be classified as a General Purpose chip.Currently, it consists of only 2 elements.The recommended mounting method is Surface Mount .A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.8 pins are available on the comparator.As a result, this comparator displays a quiescent current of 100μA .There is a Surface Mount for mounting it on a PCB or other board.Normal operation of the device requires a nominal supply current of 40μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 40μA .Comparator electronics is not recommended to maintain a temperature above 70°C .Comparator electronics is not suComparator electronicsable for temperatures below 0°C .A comparator's maximum supply voltage is 12V volts.Comparator electronics is possible to operate this comparator wComparator electronicsh a minimum supply voltage of 3V .For the output to be of high quality, 2 channels must cooperate together.
ALD2303SAL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 100μA
ALD2303SAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2303SAL linear comparators applications.
- Motor drives
- Infotainment and Clusters
- Laptop Computers
- Mobile Communications
- Automatic Test Equipment
- Window Comparators
- Security Detection Systems
- General-Purpose, Low-Voltage Applications
- Zero-Crossing Detectors
- Set Top Boxes
