banner_page

ALD2321ASCL

Surface Mount Tube 50mA mA 1.1 μs μs Linear Comparators 20pA pA 2010 180μA μA 200μV mV Surface Mount


  • Manufacturer: Advanced Linear Devices Inc.
  • Nocochips NO: 16-ALD2321ASCL
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 654
  • Description: Surface Mount Tube 50mA mA 1.1 μs μs Linear Comparators 20pA pA 2010 180μA μA 200μV mV Surface Mount (Kg)

Details

Tags

Parameters
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Supplier Device Package 16-SOIC
Operating Temperature 0°C~70°C
Packaging Tube
Published 2010
Series EPAD®
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type General Purpose
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Max Power Dissipation 600mW
Output Type CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL
Number of Elements 2
Number of Channels 2
Max Supply Voltage 10V
Min Supply Voltage 3V
Nominal Supply Current 180μA
Output Current 50mA
Max Supply Current 180μA
Quiescent Current 180μA
Response Time 1.1 μs
Common Mode Rejection Ratio 75 dB
Voltage - Supply, Single/Dual (±) 4V~10V ±2V~5V
Output Current per Channel 50mA
Input Offset Voltage (Vos) 200μV
Input Bias Current 20pA
Current - Quiescent (Max) 180μA
Voltage - Input Offset (Max) 0.2mV @ 5V
Current - Input Bias (Max) 20pA @ 5V
CMRR, PSRR (Typ) 80dB CMRR, 75dB PSRR
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount

ALD2321ASCL Overview


In order to facilitate transportation, it is packaged in 16-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL .The chip is packaged with Tube .This is a typical comparator of type General Purpose .In total, it contains 2 elements.The type of mounting recommended is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .Electronic comparator has 16 pins.A quiescent current of 180μA is observed in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 180μA .If the current supply exceeds 180μA , the comparator could malfunction.In general, temperatures higher than 70°C are not recommended.Comparator electronics cannot be operated at a temperature lower than 0°C .Compatibility is defined as 10V when the comparator is operating at its maximum supply voltage.Using a voltage as low as 3V is possible for this comparator.To ensure a high level of output quality, 2 channels work together.The part is based on EPAD? .

ALD2321ASCL Features


CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA

ALD2321ASCL Applications


There are a lot of Advanced Linear Devices Inc. ALD2321ASCL linear comparators applications.

  • Pulse, Squarewave, and Time Delay Generators
  • Body Control Modules
  • Infotainment and Clusters
  • General Purpose Low Voltage Applications
  • Industrial
  • Simple Analog-to-Digital Converters (ADCs)
  • Consumer Medical Electronics
  • Appliances
  • Security Detection Systems
  • Hand-Held Electronics

Write a review

Note: HTML is not translated!
    Bad           Good