Parameters |
Min Operating Temperature |
0°C |
Max Power Dissipation |
600mW |
Output Type |
CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL |
Number of Elements |
2 |
Number of Channels |
2 |
Max Supply Voltage |
10V |
Min Supply Voltage |
3V |
Nominal Supply Current |
180μA |
Output Current |
50mA |
Max Supply Current |
180μA |
Quiescent Current |
180μA |
Response Time |
1.1 μs |
Common Mode Rejection Ratio |
75 dB |
Voltage - Supply, Single/Dual (±) |
4V~10V ±2V~5V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
500μV |
Max Input Current |
20pA |
Input Bias Current |
20pA |
Current - Quiescent (Max) |
180μA |
Voltage - Input Offset (Max) |
0.5mV @ 5V |
Current - Input Bias (Max) |
20pA @ 5V |
CMRR, PSRR (Typ) |
80dB CMRR, 75dB PSRR |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Supplier Device Package |
16-SOIC |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2004 |
Series |
EPAD® |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Type |
General Purpose |
Max Operating Temperature |
70°C |
ALD2321BSCL Overview
For convenience, it is packaged in 16-SOIC (0.154, 3.90mm Width) .Output type CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL is used for this comparator.This package has been designed with Tube .It's a typical General Purpose comparator.The total number of elements is 2 .In general, mounting type Surface Mount is recommended.In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .The comparator consists of 16 pins.There is a quiescent current of 180μA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 180μA when using the device.A current supply greater than 180μA may result in the comparator malfunctioning.You are allowed to input a maximum current of 20pA into the device.Comparator electronics is not recommended to operate at a temperature higher than 70°C .Temperatures below 0°C are not suitable for the device.A comparator's maximum supply voltage is 10V .There is a minimum supply voltage of 3V for this comparator.For the output quality to be maintained, 2 channels work together.Comparator electronics is a comparator part from the EPAD? series.
ALD2321BSCL Features
CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
ALD2321BSCL Applications
There are a lot of Advanced Linear Devices Inc. ALD2321BSCL linear comparators applications.
- General-Purpose Portable Devices
- Infotainment and Clusters
- Set Top Boxes
- Ultra-Low Power Systems
- Wide Range VCO; MOS Clock Timers
- High-Speed Sampling Circuits
- Window Comparators
- DC/DC and AC/DC power supplies
- RC Timers
- Handheld Instruments