ALD2331BPAL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| Series | EPAD® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Power Dissipation | 600mW |
| Reach Compliance Code | unknown |
| Output Type | CMOS, NMOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 180μA |
| Output Current | 50mA |
| Max Supply Current | 180μA |
| Quiescent Current | 180μA |
| Response Time | 2.4 μs |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Input Offset Voltage (Vos) | 1mV |
| Voltage Gain | 103.52dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Max Input Current | 20pA |
| Input Bias Current | 20pA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 20pA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 75dB PSRR |
| Current - Output (Typ) | 50mA @ 5V |
| RoHS Status | ROHS3 Compliant |
ALD2331BPAL Overview
The product is packaged in 8-DIP (0.300, 7.62mm) to facilitate transportation.The comparator has a CMOS, NMOS, Open-Drain, TTL output.We ship the part through Tube .In general, the chip type can be classified as General Purpose .In total, it contains 2 elements.The recommended mounting type is Through Hole .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.This comparator presents a quiescent current of 180μA .This component has a Through Hole mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 180μA in order to use the device normally.A supply current exceeding 180μA may result in the comparator malfunctioning.You can input a maximum current of 20pA into this device.A voltage gain of 103.52dB can be determined from the voltage formula for the part.The part belongs to the series of comparator EPAD? .
ALD2331BPAL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
Voltage Gain: 103.52dB
ALD2331BPAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2331BPAL linear comparators applications.
- High-Speed Sampling Circuits
- Building automation
- Self-diagnostics
- Power management
- Current and voltage sensing
- Zero-Crossing Detectors
- Battery management and protection
- Window Comparators
- Hand-Held Electronics
- Mobile Phones
