ALD2331SAL
| Parameters | |
|---|---|
| Max Supply Current | 180μA |
| Propagation Delay | 600 ns |
| Quiescent Current | 180μA |
| Response Time | 1.1 μs |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 103.52dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Input Bias Current | 20pA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 20pA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 75dB PSRR |
| Current - Output (Typ) | 50mA @ 5V |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| Series | EPAD® |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Power Dissipation | 600mW |
| Reach Compliance Code | unknown |
| Pin Count | 8 |
| Output Type | CMOS, NMOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Number of Channels | 3 |
| Nominal Supply Current | 180μA |
| Output Current | 50mA |
ALD2331SAL Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.A comparator with an output type of CMOS, NMOS, Open-Drain, TTL is being used.This device is designed in Tube case.The type of the chip can be classified as General Purpose .This element consists of 2 elements in total.The device contains 8 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .The comparator consists of 8 pins.As a result, this comparator displays a quiescent current of 180μA .Mounting on PCBs or other boards is easy with the Surface Mount .Normal use of the device should require a nominal supply current of 180μA .If the current supply exceeds 180μA , the comparator could malfunction.The voltage formula shows that the part has a voltage gain of 103.52dB .To maintain the output quality, 3 channels work together.The part is based on EPAD? .
ALD2331SAL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
Voltage Gain: 103.52dB
ALD2331SAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2331SAL linear comparators applications.
- Threshold Detectors
- General Purpose Low Voltage Applications
- Laptop Computers
- General-Purpose Portable Devices
- Simple Analog-to-Digital Converters (ADCs)
- Appliances
- Current and voltage sensing
- Portable Battery Monitoring
- Window Comparators
- Automatic Test Equipment
