Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2010 |
Series |
EPAD® |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Type |
General Purpose |
Max Power Dissipation |
600mW |
Reach Compliance Code |
unknown |
Pin Count |
8 |
Output Type |
CMOS, NMOS, Push-Pull, TTL |
Number of Elements |
2 |
Nominal Supply Current |
500μA |
Output Current |
50mA |
Max Supply Current |
500μA |
Quiescent Current |
500μA |
Response Time |
2.4 μs |
Common Mode Rejection Ratio |
75 dB |
Voltage - Supply, Single/Dual (±) |
4V~10V ±2V~5V |
Input Offset Voltage (Vos) |
500μV |
Voltage Gain |
103.52dB |
Power Supply Rejection Ratio (PSRR) |
75dB |
Max Input Current |
20pA |
Input Bias Current |
20pA |
Voltage - Input Offset (Max) |
0.5mV @ 5V |
Current - Input Bias (Max) |
20pA @ 5V |
CMRR, PSRR (Typ) |
80dB CMRR, 75dB PSRR |
Current - Output (Typ) |
50mA @ 5V |
RoHS Status |
ROHS3 Compliant |
ALD2332APAL Overview
Electronic comparator is packaged in 8-DIP (0.300, 7.62mm) for convenient transportation.The comparator has an output type of CMOS, NMOS, Push-Pull, TTL .The chip is packaged with Tube .When it comes to types, this comparator is a typical General Purpose .This is a 2 element comparator.A total of 8 pins are included.The recommended mounting method is Through Hole .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .The comparator displays a quiescent current of 500μA .The PCB or other board has a Through Hole for mounting.Normal operation of the device requires 500μA supply current.An excess of current supply over 500μA could result in malfunction of the comparator.Input current to the device cannot exceed 20pA .Comparator electronics follows that the voltage gain of the part is 103.52dB .The part belongs to the EPAD? series of comparator parts.
ALD2332APAL Features
CMOS, NMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 500μA
Voltage Gain: 103.52dB
ALD2332APAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2332APAL linear comparators applications.
- Current and voltage sensing
- Mobile Communications
- Mobile Phones and Tablets
- Factory automation & control
- Appliances
- Alarm and Monitoring Circuits
- Motor drives
- Pulse, Squarewave, and Time Delay Generators
- Self-diagnostics
- Metering Systems