ALD2332BPAL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| Series | EPAD® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Power Dissipation | 600mW |
| Reach Compliance Code | unknown |
| Output Type | CMOS, NMOS, Push-Pull, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 500μA |
| Output Current | 50mA |
| Max Supply Current | 500μA |
| Quiescent Current | 500μA |
| Response Time | 2.4 μs |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 4V~10V ±2V~5V |
| Input Offset Voltage (Vos) | 1mV |
| Voltage Gain | 103.52dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Max Input Current | 20pA |
| Input Bias Current | 20pA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 20pA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 75dB PSRR |
| Current - Output (Typ) | 50mA @ 5V |
| RoHS Status | ROHS3 Compliant |
ALD2332BPAL Overview
In order to make transportation easier, it is packaged in 8-DIP (0.300, 7.62mm) .Output type CMOS, NMOS, Push-Pull, TTL is used for this comparator.We ship the part through Tube .A comparator of this type is typically of type General Purpose .There are a total of 2 elements in it.A Through Hole mounting type is recommended.A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.A quiescent current of 500μA is displayed by this comparator.This component has a Through Hole mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 500μA when using the device.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 500μA .Electronic comparator is possible to input a maximum current of 20pA into the device.From the voltage formula, the voltage gain of the part is 103.52dB .The part is from EPAD? comparator series.
ALD2332BPAL Features
CMOS, NMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 500μA
Voltage Gain: 103.52dB
ALD2332BPAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2332BPAL linear comparators applications.
- Laptop Computers
- Simple Analog-to-Digital Converters (ADCs)
- General-Purpose, Low-Voltage Applications
- Building automation
- Notebooks and PDAs
- Mobile Communications
- Current and voltage sensing
- System control and monitoring
- Portable Battery Monitoring
- Lithium ion battery monitoring
