ALD2332SAL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| Series | EPAD® |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Power Dissipation | 600mW |
| Reach Compliance Code | unknown |
| Pin Count | 8 |
| Output Type | CMOS, NMOS, Push-Pull, TTL |
| Number of Elements | 2 |
| Number of Channels | 3 |
| Nominal Supply Current | 500μA |
| Output Current | 50mA |
| Max Supply Current | 500μA |
| Propagation Delay | 400 ns |
| Quiescent Current | 500μA |
| Response Time | 1.1 μs |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 4V~10V ±2V~5V |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 103.52dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Input Bias Current | 20pA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 20pA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 75dB PSRR |
| Current - Output (Typ) | 50mA @ 5V |
| RoHS Status | ROHS3 Compliant |
ALD2332SAL Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, NMOS, Push-Pull, TTL output type for this comparator.The part will be shipped by Tube .Electronic comparator can be classified as a General Purpose chip.This element consists of 2 elements in total.There are 8 pins on this board.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.Electronic comparator has 8 pins.There is a quiescent current of 500μA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.The nominal supply current of the device should be 500μA for normal use.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 500μA .Comparator electronics is clear from the voltage formula that the voltage gain of the part is 103.52dB .To ensure a high level of output quality, 3 channels work together.The part is from EPAD? comparator series.
ALD2332SAL Features
CMOS, NMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 500μA
Voltage Gain: 103.52dB
ALD2332SAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2332SAL linear comparators applications.
- Wireless Base Stations
- System control and monitoring
- Window Comparators
- Battery-Powered Electronics
- General-Purpose, Low-Voltage Applications
- Infotainment and Clusters
- Notebooks and PDAs
- Industrial
- Factory automation & control
- Body Control Modules
